Overview
The Bilstein 24-185202 is a rear 46mm monotube shock absorber from the 4600 Series, rated for 0 to 1 in. of lift and finished in yellow with a heavy duty build. It fits the 1997–2002 Ford Expedition in Eddie Bauer and XLT trims and the 1998–2002 Lincoln Navigator in Base trim. The fitment section below spells out the full coverage.
In a monotube design, one tube holds the damping oil and a pressurized gas section, separated by a free piston. Heat from the oil moves outward through the shock body, and a dividing piston lets the oil expand as it warms. That combination reduces foaming and thinning of the oil as temperatures climb.
The tube is seamless and formed by extrusion, which gives tight peak-to-valley tolerance and consistent wall thickness. Compression and rebound damping can be set independently at the piston head. The digressive piston design is built for durability and long service life, and the 46mm body size is the main dimension of the unit.
Key features
- Heavy duty 46mm monotube gas-charged construction
- Dividing piston allows oil expansion as heat builds
- Seamless extruded tube with tight wall thickness control
- Independently adjustable compression and rebound damping
- Digressive piston design credited with durability
- Yellow finish
Rear shock setup
A rear shock on a full-size SUV controls rebound when the axle rises and falls over ruts and ledges. A heavy duty body and a dividing piston help the damping hold up when the shock works hard on repeated trail sections or when the vehicle carries extra cargo. Lift changes the geometry, so a rear rating covering a range of lift should be checked against how the vehicle sits.
Rear shocks often wear alongside bushings and bump stops, and a sagging or bouncy rear end can point to worn units rather than springs. Check for fluid streaks down the body, dents in the tube and cracked boots. Replacing both sides keeps the ride even from left to right.
- Look for fluid on the outer tube
- Check bump stops for cracking
- Swap both units on an axle together
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-185202 |
| Old part number | BILF4-BE5-2573-H1 |
| UPC | 651860616339 |
| Shock series | 4600 Series |
| Type | Monotube, gas charged |
| Size | 46mm |
| Position | Rear |
| Lift height rating | 0 to 1 in. lift |
| Finish | Yellow |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1997–2002 Ford Expedition in Eddie Bauer and XLT trims and the 1998–2002 Lincoln Navigator in Base trim, and these are the only vehicles covered for this rear shock. Other Expedition and Navigator years fall outside this coverage, and Ford F-150 and other models are not included.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear 46mm monotube shock absorber.









