Overview
The Bilstein 24-186636 is a rear 5100 Series shock absorber for Chevrolet Silverado and GMC Sierra trucks, plus selected Dodge Ram models, with a 2 in. lift listed. It is a 46mm smooth-body monotube shock designed for specific manufacturer lift kits that keep the stock O.E.M. mounting configuration.
The 5100 Series is traditional technology for lifted trucks, Jeeps and prerunners, built on a single tube high gas pressure design. It has independent rebound and compression tuning and a high-flow piston that reduces harshness. The larger working piston area gives control with large diameter tires.
Key features
- Monotube gas pressure construction
- Self-adjusting deflecting disc valving
- High-flow piston that Bilstein says reduces harshness
- Independent rebound and compression tuning
- Designed for specific manufacturer lift kits
- Boot included
Lift kit fit and truck use
A rear shock on a lifted truck has to control more travel and more weight than a stock setup. Lift kits change the geometry of the suspension, so the shock’s mounts, length and stroke need to suit the kit as well as the truck. Eye mounts at both ends keep the connection simple, but the stock mounting layout must still match the lift before the shock is installed.
Large diameter tires and heavier loads put more demand on damping, so the piston area and tuning matter in daily driving. The boot protects the exposed shaft from road grit and salt, and it should be checked during every service. Rebound and compression can be adjusted separately on this design, which helps set the feel after a new lift is installed.
- Confirm the lift kit keeps the stock mounting layout
- Check the boot during each service
- Match shock length to the lift and tire size
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-186636 |
| UPC | 651860482033 |
| Shock series | 5100 Series |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height | 2 in. lift |
| Collapsed length | 18.17 in |
| Extended length | 29.92 in |
| Travel length | 11.75 in |
| Lower mount | Eye, 14.12mm |
| Upper mount | Eye, 14.12mm |
| Shaft diameter | 14mm |
| Reservoir | No |
| Finish | Zinc plated |
| Body | 46mm ID smooth body, non-coilover |
| Internal design | Monotube |
| Boot | Included |
Vehicle fitment
This shock fits these vehicles, with trims as shown below:
- Chevrolet Silverado 1500: 1999–2013; 2007 Classic; 1500 HD 2001–2003 and 2005–2006; 1500 HD Classic 2007
- Chevrolet Silverado 2500: 1999–2004; 2500 HD 2001–2010; 2500 HD Classic 2007
- Chevrolet Silverado 3500: 2001–2006; 3500 Classic 2007; 3500 HD 2007–2010
- GMC Sierra 1500, 2500 and 3500: the same year spans as the Silverado rows
- Dodge Ram 1500: 2006–2008; Ram 2500 and 3500: 2003–2010 and 2011–2012
Pickups and SUVs from other years, Ford trucks, and Dodge Ram 1500 years outside 2006–2008 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock is designed for manufacturer lift kits that keep the stock O.E.M. mounting configuration, so confirm the kit matches before installing. Both ends use 14.12mm eye mounts.
What’s included
The package is one rear shock absorber with a boot. Check the mounting hardware you need against your installation before starting.









