Overview
The Belltech Street Performance front strut, part number BEL25007, is a front strut for Ford F-150 trucks from 2015 to 2020. It is sold individually and uses an adjustable ring and perch system to set the ride height.
The ring and perch system lets the installer choose the amount of drop or lift from one part number, with adjustment in half inch increments from stock height up to 3 inches of lift.
The strut is a performance replacement for trucks with strut suspension. Its low speed compression and rebound are tuned to balance everyday comfort with off-road performance.
Key features
- Adjustable ring and perch height system
- Stated range from OEM stock height up to 3 inch lift
- Large 50 mm strut housings
- Hardened chrome 18 mm piston rods
- Independent 35 mm rebound and compression valves
- Progressive rate open cell foam bumpstops
- Teflon guide bushings and a triple lip NBR seal
- Reinforced OEM quality bushings
Ride height and alignment
A front strut carries spring load, damps suspension movement and helps set the steering geometry. Changing the ring and perch position moves the ride height, which in turn changes camber and caster, so the truck should be aligned after every adjustment. Set both front struts to the same position so the truck tracks straight and the steering feels even.
Before fitting a new strut, inspect the upper mount, bearing and bump stop on the old unit. Dry, cracked mounts and leaking struts are common reasons for a rough or noisy front end. Replacing both fronts together helps keep damping and handling balanced.
- Get an alignment after any height change
- Set both fronts to the same ring and perch position
- Inspect upper mounts and bump stops during install
- Check boots and seals for leaks
Specifications
| Brand | Belltech |
|---|---|
| Part number | BEL25007 |
| Position | Front |
| Strut housing | 50 mm |
| Piston rod | Hardened chrome, 18 mm |
| Valves | Independent 35 mm rebound and compression |
| Bumpstop | Progressive rate open cell foam |
| Adjustment | Ring and perch, half inch increments |
| Sold as | Individually |
| Fitment | Direct fit |
Vehicle fitment
It fits 2015–2020 Ford F-150 models, including King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, XL and XLT trims. Confirm fit for your vehicle’s year, model and trim before ordering.
The list does not include the 2014 and earlier or the 2021 and later F-150, or other Ford trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Changing the ring and perch position alters the ride height, so set the height to match your lowering or lift and check the alignment afterward. The struts are sold individually, so the other front strut is needed to keep both sides matched.
What’s included
The product is one front strut under part number BEL25007, with the bumpstop and bushings fitted.










