Overview
The Bilstein B12 Coil Spring Suspension Kit (part number 36-281831) is a rear lift kit for the 2003–2024 Toyota 4Runner, the 2010–2024 Lexus GX 460 and the 2007–2014 Toyota FJ Cruiser.
The B12 (Special) design changes ride height using several technologies, letting the height be set for a specific use.
Key features
- Rear lift only
- Bilstein B12 (Special) suspension kit design
- Blue finish
- Direct fit for three Toyota and Lexus models
Rear lift and driveline
A rear-only lift raises the back of the vehicle and leaves the front where it was. This changes the angle of the rear driveline and the position of the axle, so the pinion angle should be checked after installation. Rear height changes also alter the shock angle and bump stop engagement.
Because the front stays put, the difference in height between the two ends can change how the vehicle handles on pavement and trail. Check the track bar geometry, since a rear lift can shift the axle sideways if the bar is not adjusted. Brake line length should be checked as well.
Rear suspension parts often wear at the same time as a lift is installed. Inspect bushings, shock mounts and rear bump stops for cracks and play, and replace worn parts while the rear is apart.
- Check pinion angle after installation
- Inspect track bar geometry and axle position
- Look at rear brake line length
Specifications
| Brand | Bilstein |
|---|---|
| Part number | BIL36-281831 |
| Position | Rear |
| Front lift method | None, rear lift only |
| Finish color | Blue |
| Track bar drop | Not included |
| Bump stops | None |
| Type | Metal |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2010–2024 Lexus GX 460 Base and Premium, the 2003–2024 Toyota 4Runner (Limited, SR5, SR5 Premium, Sport, TRD Off-Road, TRD Off-Road Premium, TRD Pro, Trail and Venture), and the 2007–2014 Toyota FJ Cruiser.
The 2002 and earlier 4Runner and the 2023 and newer models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A rear-only lift changes the rear height without raising the front, so check the rear driveline angle and the track bar geometry afterward.
What’s included
The kit is the rear B12 coil spring suspension set. The track bar drop is not included, so plan for that part separately if it is needed.
Not included: track bar drop.









