Overview
The Baer Brakes 4262261B is a black SS4 rear brake kit made for Ford 9 inch early big bearing housing ends and a 5×5.00 wheel bolt pattern. A 4-piston S4 caliper clamps a 12 inch 1-piece slotted, drilled rotor, so the kit gives a complete rear disc setup in one package.
The backing plate that carries the caliper also houses a 1-piece park brake shoe assembly. The caliper has a black powder coated finish and the rotor is iron. No vehicle year, make or model is named for this kit, so match it to your rear axle flange and wheel pattern.
Key features
- 2-piece S4 caliper design with 4-piston action, made in Phoenix, Az
- CNC machined from US-sourced forged or billet aluminum
- Powder coated black finish
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips
- Dual seals resist dust, weather and pressure
- 1-piece slotted, drilled, zinc-plated 12 inch rotor
- Stainless braided, DOT approved hoses included
- 1-piece park brake shoe assembly in the backing plate
Pads, rotors and wear
Rear rotor and pad wear tends to show first as vibration or a pull under firm braking. Inspect the rotor for scoring, heat cracks and thickness loss at routine service, and replace pads once the friction material is worn thin or uneven. Slotted and drilled rotors can shed debris, so check for pad glazing if the brakes start to feel inconsistent.
Choose pads to match the rotor and the driving. Aggressive compounds can wear rotors faster on street use, while softer compounds may fade under towing or long descents. Park brake shoes inside the backing plate also wear over time and should be checked whenever the cables are adjusted. Caliper slide pins benefit from cleaning and light lubrication at each brake job, so the caliper can float and release the pads evenly.
- Rotor scoring and heat cracks
- Pad thickness and even wear
- Caliper slide pin movement
- Park brake shoe adjustment
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262261B |
| UPC | 844165028376 |
| Caliper | S4, 4-piston, fixed |
| Caliper color | Black |
| Rotor type | 1-piece, vented |
| Rotor material | Iron |
| Rotor outside diameter | 12.0 inch |
| Rotor thickness | 1.02 |
| Rotor surface | Slotted, drilled and zinc plated |
| Lug count | 5 lug |
| Bolt pattern | 5×5.00 |
| Minimum wheel diameter | 16.0 inch |
| Brake pad FMSI number | DR1-C |
| Pad type | DR1 or HB100 |
| Template | S113E |
| Hose material | Steel braided, DOT approved |
| Axle flange | Ford 9 Inch Early Big Bearing (rear) |
| Park brake | Included |
| Emission code | 6 |
| Sold as | Kit |
| Country of origin | US |
Vehicle fitment
The kit is for the Ford 9 inch early big bearing housing ends with a 5×5.00 pattern. Check your vehicle’s year, model and trim against the kit before buying.
Baer cannot guarantee fit into every wheel style or manufacturer, so compare template S113E to the wheel you plan to run. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Park brake cables are not included, so plan on a separate cable set for the parking function. Lug nuts are also not included. Because this hardware bolts to the rear axle housing ends, a qualified technician should fit the kit and test the brakes before the vehicle is driven.
What’s included
The kit includes the black S4 4-piston rear caliper, the backing plate with its 1-piece park brake shoe assembly, the 12 inch slotted and drilled rotor, and stainless braided hoses.
Not included: park brake cables, lug nuts and the front rotor.















