Overview
The Baer Brakes 6920869 is a right-side, 1-piece plain finish replacement brake rotor with a 15.000 inch outside diameter, made for select Baer Brake systems. A brake rotor is the disc the brake pads clamp against, so this part replaces a worn or damaged rotor on the right side of the vehicle only. The rotor is directional and made for the right side.
It is a vented, full cast iron rotor with a 6 x 135 mm bolt circle and a 3.547 inch center hole. Baer sells rotors individually, so a complete axle needs one rotor for each side.
Key features
- Right-side directional design, specific to the right side of the vehicle
- Curved vane design for optimum cooling
- Purpose-built castings engineered for rotor stability and resistance to distortion
- Dynamically balanced for vibration-free running
- Full cast, one-piece construction with a plain surface finish
- Vented rotor with a 1.18 inch nominal thickness
Before you buy
Rotors wear through use, and the pads can leave grooves or the surface can warp under heat. Before fitting a replacement, check the old rotor for scoring, a lip on the outer edge, and uneven thickness across its face. A rotor worn past its minimum thickness should be replaced rather than resurfaced. Pads are usually changed at the same time so the new rotor beds in evenly.
Rotors are sold one at a time, so replacing both sides keeps braking balanced between wheels. Look at the hub, the wheel bearing, and any hardware that touches the rotor, and clean the hub face before mounting. Many shops also replace the caliper hardware together with the pads to avoid uneven wear on the new surface.
- Inspect the caliper slide pins for free movement
- Clean rust from the hub face and register
- Replace pads together with the rotor for an even bed-in
- Keep the right-side rotor on the right side only
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920869 |
| UPC | 844165037309 |
| Axle side | Right |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Surface type | Plain |
| Brake surface | Directional |
| Material | Cast iron |
| Grade type | Performance |
| Outside diameter | 15.000 inch |
| Nominal thickness | 1.18 inch |
| Overall height | 2.125 |
| Center hole diameter | 3.547 inch |
| Stud/lug hole circle diameter | 135 mm |
| Stud/lug hole quantity | 6 |
| Drum in hat | No |
| ABS tone ring included | No |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is made for select Baer Brake systems. Confirm fit for your vehicle’s year, model and trim before ordering, and match the 3.547 inch center bore and 6 x 135 mm bolt pattern to your hub.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount this rotor on the right side only, since the directional design is made for that side. Check the 3.547 inch center bore and the 6 x 135 mm bolt pattern against your hub before fitting. Brake components affect stopping ability, so have a qualified technician check the installation and torque.
What’s included
One right-side replacement rotor, sold as each.
Not included: The left-side rotor, which is sold separately because rotors are sold individually.
