Overview
A right-side, 1-piece plain replacement rotor, the Baer Brakes 6920223 measures 14 inches across and 1.181 inches thick. Baer built it as a full cast replacement rotor for select Baer brake systems, and it is sold individually for the right side of the vehicle.
The plain friction face has no slots or drilled holes. Vanes are curved for cooling, the rotor is vented and directional, and it is dynamically balanced. The center hole is 3.098 inches and the overall height is 3.764 inches. Mounting uses six studs on a 5.5 inch circle. No fitment is named for this number.
Key features
- Full cast, one-piece construction
- Plain friction surface with no slots
- Curved vane design for cooling
- Vented, directional brake surface
- Dynamically balanced for vibration-free performance
- Made from cast iron castings of premium materials
- Right side only
- Performance grade
Choosing a plain rotor
A plain rotor has a smooth friction face with no slots or drilled holes. It is often chosen for everyday driving, where the pads can bed in evenly and the surface stays consistent over time. The vented design allows air to pass between the two friction faces, which helps the rotor shed heat during repeated stops.
Plain rotors are sensitive to pad selection and to how the new pads are bedded in. Rust can form on the friction face when a vehicle sits, and it is normally cleared on the first few stops. Check the rotor for heavy scoring, uneven wear or thickness loss, and replace it when any of these appear.
- Confirm the axle side before mounting
- Bed in new pads and rotor together
- Inspect for scoring and thickness loss
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920223 |
| UPC | 90127961858 |
| Axle position | Right |
| Construction | Full cast, one piece |
| Material | Cast iron |
| Outside diameter | 14 in |
| Nominal thickness | 1.181 in |
| Stud/lug hole circle diameter | 5.5 in |
| Stud/lug hole quantity | 6 |
| Center hole diameter | 3.098 in |
| Overall height | 3.764 in |
| Rotor type | Vented |
| Surface type | Plain |
| Brake surface | Directional |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
This rotor is a replacement for select Baer brake systems. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering. This rotor is specific to the right side of the vehicle.
Installation notes
Because the rotor is directional, place it on the right side only and follow the rotation direction it was designed for. Rotors are sold individually, so both sides need separate units. Brake work affects stopping power, so a qualified technician should install it and bed in the pads and rotor.
What’s included
One right-side plain replacement rotor, sold as each.
Not included: ABS tone ring, and a rotor for the left side.
