Overview
The Baer Brakes 6920261 is a right-side, 14.000 inch two-piece slotted replacement brake rotor for select Baer Brake systems. It is a vented cast iron disc with a 1.250 inch nominal thickness and 12 mounting bolt holes on an 8.50 inch bolt circle diameter.
The castings are built for performance-grade use with a curved vane layout for cooling. The brake surface is directional, so this rotor is made for the right side of the vehicle only and a left rotor is a separate part. Each rotor is dynamically balanced for smooth running.
Key features
- Two-piece ring with a slotted friction surface
- Curved vane design aimed at cooling
- Cast iron construction in a performance grade
- Dynamically balanced for smooth running
- Directional brake surface for right-side mounting only
- Designed for rotor stability and resistance against distortion
Choosing the right setup
Choosing a replacement rotor starts with the hub and caliper it will run with. The rotor has to match the mounting pattern and the thickness the caliper and pads are designed for, and the directional face has to sit on the correct side of the vehicle. Two-piece rotors keep the hat on the hub in many setups, so the hat and its fasteners should be inspected when the ring is changed.
Slotted friction faces are often chosen for wet or muddy use, since the grooves help clear water and debris from the pad contact area. They can also wear pads faster in some driving, so pad choice should be considered together with the rotor. For off-road work, check the caliper bolts and brake lines at each service, and make sure the wheel bearings have no play.
- Pair slotted rotors with pads rated for the same use
- Check the hat and mounting bolts when replacing the ring
- Inspect brake lines for chafing near the caliper
- Keep spare pads and hardware on hand for trail repairs
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920261 |
| UPC | 90127961889 |
| Outside diameter | 14.000 inch |
| Nominal thickness | 1.250 inch |
| Bolt hole quantity | 12 |
| Bolt hole circle diameter | 8.50 inch |
| Material | Cast iron |
| Construction | Two piece |
| Rotor type | Vented |
| Surface type | Slotted |
| Brake surface | Directional |
| Axle side | Right |
| Grade type | Performance |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | USA |
| Unit of sale | Each |
Vehicle fitment
The rotor is a replacement for select Baer Brake systems. Compare its right-side 14.000 inch diameter and 12 x 8.50 inch bolt pattern with your application before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount the rotor on the right hub only, because the directional brake surface is made for that side. The ABS tone ring is not included with the rotor. Brake rotors are safety parts: clean the hub face and check runout before the rotor is bolted on.
What’s included
One right-side replacement rotor, unit of sale each.
Not included: ABS tone ring.
