Overview
The Baer Brakes 6911076 is a left-side, 1-piece slotted and drilled replacement brake rotor with a zinc-plated finish and an 11.650 inch outside diameter. It is a vented cast iron rotor with a 0.705 inch nominal thickness, offered for select Baer Brake systems and sold as Each.
The castings are purpose built, and the curved vane design is meant for cooling. The rotor has no drum in the hat, is dynamically balanced, and is made for the left side of the vehicle only, so match the side before ordering. The construction is full cast in one piece, keeping the rotor body in a single casting. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Slotted and drilled friction surface on a zinc-plated finish
- Curved vane design, which Baer Brakes says is meant for cooling
- Dynamically balanced for smooth, vibration-free running
- Directional rotor built for the left side only
- Drum-in-hat configuration
- Full cast, one-piece cast iron construction
- Five-lug pattern listed at 4.50 and 4.75 inch bolt circle diameters
Before you buy
A left-side rotor is only one half of a brake job, so plan the pair before the first wheel comes off. Check pad thickness, caliper slide movement and the condition of the hub face while the old rotor is still in place. Rust on the mounting surface can cause runout, so clean it down to bare metal before the new rotor goes on. Torque the lug nuts in a star pattern and recheck them after the first few drives.
Zinc-plated surfaces protect against surface rust during storage, but the friction face still needs a proper bed-in with new pads. Expect some surface color and light dust during the first stops. Keep the opposite rotor in mind, since mismatched wear between sides can pull under braking.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6911076 |
| UPC | 844165054399 |
| Outside diameter | 11.650 inch |
| Nominal thickness | 0.705 inch |
| Register diameter | 2.780 inch |
| Stud/lug hole circle diameter | 4.50 and 4.75 inch |
| Stud/lug hole quantity | 5 |
| Material | Cast iron |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Surface type | Slotted, drilled and zinc-plated |
| Axle | Left |
| Brake surface | Directional |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
It is positioned for select Baer Brake systems, so the correct application depends on the brake system rather than one vehicle. Confirm fit for your vehicle’s year, model and trim before ordering.
This rotor is sized for a specific brake system and should not be treated as a general replacement for any five-lug vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotor is directional and specific to the left side, so verify the side before mounting. Because it is sold individually, a matching opposite-side rotor must be ordered separately when both sides are being serviced.
What’s included
One left-side replacement rotor, sold as Each.
Not included: the opposite-side rotor, since each is sold separately.
