Overview
The Baer Brakes 6921094 is a right-side replacement brake rotor measuring 11.650 inches in diameter and .705 inch thick. It is a one-piece, vented cast iron rotor with a slotted, drilled and zinc-plated friction surface and a drum-in-hat section. Use part number 6921094 to confirm the match against your existing Baer brake hardware.
Baer Brakes positions this rotor as a performance replacement for select Baer brake systems. The design is directional and made for one side of the vehicle only, so the right-side version does not replace the left. No vehicle application is given for this part number, so measure the lug pattern, center bore and rotor diameter before fitting.
Key features
- Right-side directional design, not interchangeable with the left side.
- Curved vane pattern intended to improve cooling.
- Dynamically balanced for vibration-free running.
- Slotted and drilled friction surface with a zinc-plated finish.
- Full cast, one-piece construction in cast iron.
- Drum-in-hat section included.
- The castings are made from premium materials.
Before you buy
Brake rotors wear over time, and the friction surface is the first area to inspect. A slotted and drilled face is designed to help clear pad material and gases, but it also means the rotor should be checked for cracks around the drilled holes and slots during routine service.
When choosing a replacement rotor, the hub is the controlling factor. The lug pattern, center bore and outside diameter must match the hub and the caliper bracket. Rotor thickness also affects caliper fit and pad contact, so the nominal thickness should be compared with the old rotor before installation.
Rotors are often replaced together with pads, since new pads bed in best against a matching friction surface. Inspect the hub face, wheel bearing play and the condition of the brake lines while the wheel is off.
- Measure the old rotor thickness and compare it with the new part.
- Clean the hub face and remove any rust before mounting.
- Check that the directional side marking faces the correct way.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6921094 |
| UPC | 844165054627 |
| Package quantity | Each |
| Country of origin | USA |
| Axle side | Right |
| Outside diameter | 11.650 inch |
| Nominal thickness | .705 inch |
| Center hole diameter | 2.780 inch |
| Lug pattern | 5 x 4.50 inch and 4 x 108 mm |
| Lug hole quantity | 5 and 4 |
| Material | Cast iron |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Slotted, drilled and zinc plated |
| Drum in hat | Yes |
| Grade type | Performance |
| Emission code | 6 |
| Export description | Brake components |
| ABS tone ring included | No |
Vehicle fitment
No vehicle application is established for this rotor. Compare the lug pattern, 2.780 inch center bore and 11.650 inch diameter with your hub, and confirm your vehicle’s year, model and trim before ordering.
The left-side version of this rotor is a different part and will not match a right hub. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotor is directional, so confirm the side marking matches the hub before installation. Because the rotor has a drum-in-hat section and no ABS tone ring, check whether your hub needs a separate tone ring before fitting. Brake work should be done by a qualified technician.
What’s included
One right-side rotor, package quantity each.
Not included: a matching left-side rotor, which is a separate item.
