Overview
The Baer Brakes 6911106 is a left-side 12.000 Inch replacement brake rotor, 1.020 Inch thick, with a 1-piece, slotted, drilled and zinc-plated design for select Baer Brake systems. It has a 5 x 5.00 Inch bolt pattern and a 2.780 Inch register, so match it to the Baer system it is made for before installation.
The casting is made from premium materials and uses a curved vane for cooling. It is dynamically balanced for smooth running and made of cast iron with a performance grade. It is a vented, directional rotor with a drum-in-hat configuration.
Key features
- Drum in hat design
- Full cast, one-piece cast-iron construction
- Slotted, drilled and zinc-plated surface
- Curved vane design for cooling
- Directional brake surface for the left side
- Dynamically balanced for smooth running
- Vented rotor type
Before fitting a drum-in-hat rotor
A drum-in-hat rotor houses the parking brake shoes inside the hat, so the hub and shoe assembly must be checked together. Look at the shoes, springs and adjuster for wear, and confirm the drum surface is clean before the rotor goes on. Parking brake function depends on the shoes contacting the drum evenly.
Because the friction surface is separate from the parking brake, service both systems on the same visit. Inspect the pads and caliper slides, and make sure the hub and rotor sit flat against each other. Worn shoes can keep the rotor from seating and leave the parking brake weak, so they are often replaced at the same time.
- Inspect parking brake shoes and springs
- Check the adjuster for free movement
- Clean the hub and hat before mounting
- Test the parking brake after the first short drive
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6911106 |
| UPC | 844165054429 |
| Outside diameter | 12.000 Inch |
| Nominal thickness | 1.020 Inch |
| Overall height | 2.406 |
| Stud/lug hole circle | 5.00 Inch |
| Stud/lug hole quantity | 5 |
| Register (center hole diameter) | 2.780 Inch |
| Axle | Left |
| Material | Cast iron |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface finish | Slotted, drilled and zinc plated |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is built for select Baer Brake systems rather than specific vehicles. Match the rotor to your vehicle’s year, model and trim before buying.
Because the rotor is sized to a Baer brake setup, a matching bolt pattern alone does not confirm it suits your vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Sold individually, so a pair needs one left and one right unit; this one is the left. The directional surface means it cannot be swapped with the right rotor. Drum in hat is set to Yes, so confirm the drum arrangement matches your hub before fitting. Brake work affects stopping performance, so bed in the new rotor and pads gradually as the pad maker directs.
What’s included
One left-side rotor, sold as Each.
Not included: Pads, calipers, hubs and hardware are not included with this rotor.
