Overview
The Baer Brakes 6929627 is a right-side, 1-piece replacement brake rotor measuring 12 inches in outside diameter and 1.02 inches thick. It has a slotted, drilled and zinc-plated vented braking surface and is built for select Baer Brake systems. Rotors are sold individually, so one right-side rotor is supplied per purchase.
It carries a modified drum and drum lip in its hat and is directional, so it fits only the right side of the vehicle.
Key features
- Curved vane design that aids cooling
- Full cast, one-piece construction with a vented rotor design
- Directional braking surface made for the right side only
- Dynamic balancing for vibration-free running.
- Slotted, drilled and zinc-plated surface finish on cast iron
- Drum in hat with a modified drum and drum lip
Signs the rotor is worn
Rotors wear as pads clean the braking surface, and the face can develop a lip at its outer edge or grooves that catch the pad. Inspect the rotor for scoring, heat cracks and uneven thickness at every brake service. Pulsing through the pedal often points to thickness variation, while a metal-on-metal grind usually means the pads have worn down to their backing plate. Slotted and drilled surfaces help clear gas and debris, but the holes also give cracks a place to start, so inspect them closely.
Because this rotor is directional, check the pads, caliper bracket and hub together whenever it is removed. Replacing rotors in pairs keeps braking even from side to side, so the left-side rotor is worth considering at the same time. Use the same pad compound on both sides and bed in new pads gently before any hard stops.
- Check the hat and drum lip for cracks
- Replace pads when the friction material runs thin
- Clean the hub face before mounting
- Tighten lug nuts in a star pattern
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929627 |
| UPC | 90127962527 |
| Outside diameter | 12 in |
| Nominal thickness | 1.02 in |
| Overall height | 2.406 in |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.75 in |
| Center hole diameter | 2.78 in |
| Register | 2.780 in |
| Axle side | Right |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Slotted, drilled and zinc plated |
| Material | Cast iron |
| Drum in hat | Yes |
| Notes | Has modified drum and drum lip |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
Fit depends on the select Baer Brake system on your vehicle, since the part is used only in those systems.
Vehicles and brake systems outside the select Baer Brake systems are not covered. Confirm your vehicle’s year, model and trim before ordering, since fit depends on the brake system installed.
Installation notes
Because the rotor is directional and side-specific, confirm it is the right-side part and that its braking surface direction is correct before mounting. Check the 5 x 4.75 in bolt pattern and 2.78 in center hole against the hub. Support the vehicle securely on stands before removing any wheel.
What’s included
One right-side replacement rotor, sold individually.
Not included: the left-side rotor and the ABS tone ring.
