Overview
The Baer Brakes 6920097 is a right-side, 12.000 inch by .810 inch, plain finish replacement brake rotor for select Baer Brake systems. It is a one-piece, vented full cast iron rotor with a short hat and a 5 x 4.75 inch bolt circle, sold individually.
Baer makes this rotor directional, built for one side of the vehicle only, so confirm you have the right-hand part before fitting it. Curved vanes aid cooling, and the rotor is dynamically balanced to reduce vibration. The design resists distortion.
Key features
- Plain friction surface with no slots or drilled holes
- One-piece full cast iron construction with vented design
- Curved vane layout intended to improve cooling
- Dynamic balancing for vibration-free performance
- Directional right-side rotor with a short hat
Before you buy
A brake rotor works with the caliper, pads, hub and bearings, so the right choice starts with the brake system already on the vehicle. Measure the hub bolt pattern and center bore, and compare the rotor’s hat height with the caliper bracket clearance before ordering.
Plain friction faces are common on street-driven setups because they keep pad material consistent and produce less dust than slotted faces, though they can glaze under hard use. Pads should be matched to the rotor and the type of driving the vehicle sees.
Rotors are usually replaced in pairs so braking stays even from side to side, and the pads should be bedded in after installation. Check the new rotor for runout and thickness variation when fitting it, and keep the wheel bearings and hub surface clean.
- Confirm the hub is clean and flat before mounting
- Torque lug nuts in a star pattern
- Re-check lug nut torque after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920097 |
| UPC | 844165036142 |
| Axle position | Right |
| Construction | Full cast, one piece |
| Material | Cast iron |
| Rotor type | Vented |
| Surface type | Plain |
| Brake surface | Directional |
| Outside diameter | 12.000 inch |
| Nominal thickness | .810 inch |
| Overall height | 1.988 inch |
| Stud/lug count | 5 |
| Stud/lug bolt circle | 4.75 inch |
| Center hole diameter | 2.783 inch |
| Hat style | Short hat |
| Grade type | Performance |
| ABS tone ring included | No |
| Drum in hat | No |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
It is a replacement for select Baer Brake systems, so match the rotor to the brake system you own rather than to a model name. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rotor is side-specific, mount it on the right hub only. Check the 5 x 4.75 inch bolt pattern and the 2.783 inch center hole against your hub before fitting, since the center bore and bolt circle must match exactly.
What’s included
One right-side replacement rotor, sold individually.
Not included: ABS tone ring.
