Overview
The Baer Brakes 6919088 is a left-side, 14 inch replacement brake rotor with slots, drilled holes and a zinc-plated finish, made for select Baer Brake systems. It is a 1-piece, vented full cast iron rotor sold individually.
The rotor has curved vanes for cooling and is dynamically balanced to limit vibration. It is directional and made for the left side of the vehicle. The slotted and drilled face and 1.181 inch nominal thickness are part of its sizing. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Slotted and drilled braking surface with a zinc-plated finish
- One-piece full cast construction in cast iron
- Vented body with curved vanes for cooling
- Directional surface built for the left side of the vehicle
- Dynamic balanced for vibration-free running
- Six stud holes on 5.00 and 5.50 inch hole circles
- Listed with 1.181 inch nominal thickness for a 14 inch rotor
Slotted and drilled rotors
Slots and drilled holes on a rotor face help clear debris and gases that build up between the pads and the friction surface. They also add edges that can wear pads more quickly in some setups, so pad choice matters. Pair this rotor with pads rated for the way you drive, whether that is daily commuting or heavier use off road, and bed the new pads in before heavy braking.
Zinc plating protects the rotor during storage and before first use, but the coating wears off the friction face quickly and is not a substitute for proper maintenance. Inspect the holes and slots at every brake service for hairline cracks radiating from their edges, and replace the rotor if cracks or heavy grooving appear. A left-side rotor should also be checked alongside its partner for matching wear.
- Inspect drilled holes and slots for cracks
- Choose pads suited to slotted or drilled faces
- Replace worn rotors in pairs for balanced braking
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6919088 |
| UPC | 844165054450 |
| Material | Cast iron |
| Construction | Full cast, one piece |
| Surface type | Slotted, drilled and zinc plated |
| Outside diameter | 14 in |
| Nominal thickness | 1.181 in |
| Overall height | 3.764 in |
| Center hole diameter | 3.098 in |
| Stud/lug quantity | 6 |
| Stud/lug hole circle diameter | 5.00 in and 5.50 in |
| Rotor type | Vented |
| Brake surface | Directional |
| Axle side | Left |
| ABS tone ring included | No |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
Intended applications are select Baer Brake systems.
A right-side rotor or a different diameter for the same system is a separate part and is not covered by this left-side 14 inch rotor. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the rotor is the left-side version before installation, since its braking face is made for one side only. Compare the 3.764 inch overall height with your existing rotor before fitting. The ABS tone ring is not included, so check your brake system. Each rotor is sold individually, so both sides need separate orders. Work with the vehicle securely supported and the wheel removed.
What’s included
One left-side replacement rotor, sold as each.
Not included: ABS tone ring.
