Overview
The Baer Brakes 6920117 is a slotted, right-side two-piece replacement brake rotor for select Baer Brake systems. It measures 12.790 inch across and 1.255 inch thick, and each rotor is sold individually.
The braking surface is directional, so this rotor belongs on the right side only. Baer Brakes highlights a curved vane design for cooling and a purpose-built casting made from premium materials.
Key features
- Slotted surface finish
- Curved vane design for optimum cooling
- Vented rotor with 12 bolt holes on a 7.50 inch circle
- Dynamic balanced for vibration-free performance
- Purpose-built castings from premium materials
- Performance grade
Choosing a rotor for trail use
Off-road driving puts different loads on brakes than daily driving. Long descents, repeated stops and mud can heat a rotor quickly and reduce pad grip. Matching the rotor to your driving, and keeping the hub and caliper bracket in good shape, helps the braking system hold up when the vehicle is loaded or towed.
A slotted surface sends water and gas away from the pad face, which many drivers find helpful after stream crossings. Cast iron rotors absorb and release heat slowly, which is why they are a common choice for heavier vehicles. When changing rotors, inspect the caliper slides, brake lines and wheel bearings, since those parts often wear at similar intervals.
- Check hub face runout with the rotor installed
- Replace pads when the friction material nears its limit
- Clean the hub mating surface before mounting
- Tighten fasteners to the vehicle service specification
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920117 |
| UPC | 90127961759 |
| Axle side | Right |
| Construction | Two piece |
| Material | Cast iron |
| Outside diameter | 12.790 inch |
| Nominal thickness | 1.255 inch |
| Bolt hole quantity | 12 |
| Bolt hole circle diameter | 7.50 inch |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface finish | Slotted |
| ABS tone ring included | No |
| Emission code | 6 |
| Grade type | Performance |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
It is made for select Baer Brake systems. Use your vehicle’s year, model and trim to confirm fit before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match this right-side rotor to the right side of the vehicle, because the braking surface is directional. The ABS tone ring is not part of this package. Have a qualified technician verify the install before the vehicle is driven.
What’s included
One right-side slotted replacement rotor, sold individually.
Not included: ABS tone ring.
