Overview
The Baer Brakes Premium Aluminum 5-Lug Wheel Spacers in part number 2000011 are 0.625 inch (5/8 inch) thick aluminum spacers sized for five-lug wheels on 5×4.25, 5×4.50 and 5×4.75 bolt patterns. Each spacer moves the wheel outward on its hub, which adds brake clearance and widens the track.
Baer machines each spacer from 6061-T6 billet aluminum and finishes it in clear anodize, which leaves a silver look. Every spacer has a 2.800 center bore, a 6.000 outside diameter and five stud holes of 0.562. The spacers are sold as a pair, and Baer notes they are proudly made in the USA. Owners who want more spacing than a thinner spacer provides, without going to a much thicker part, are the intended buyers.
Key features
- 0.625 inch (5/8 inch) thickness for added wheel spacing
- Machined from 6061-T6 billet aluminum
- Clear anodized finish in silver
- Five lug holes with 0.562 stud holes
- 2.800 center bore and 6.000 outside diameter
- Sold as a pair, with two spacers included
- Manufactured in the USA.
Clearance and stud length
A 5/8 inch spacer is a middle-ground choice for owners who need some brake or fender clearance without the larger shift a thick spacer causes. Start by measuring the existing clearance between the caliper, the wheel spokes and the hub face, since that figure tells you whether the spacer solves the problem. Keep the spacer flat against the hub and make sure both faces are free of paint, rust and debris before the wheel is mounted.
Wheel bearings and suspension parts see a slightly different load once the wheel sits further out, and most owners notice that first in steering feel and tire wear. Rotate tires on schedule and inspect the outer bearing and steering components at regular service intervals. Spacers rarely need work beyond inspection, but a cracked spacer or loose wheel should be dealt with immediately, and any change should be checked with a torque wrench after the first few drives.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000011 |
| UPC | 844165004707 |
| Bolt pattern | 5×4.25, 5×4.50, 5×4.75 (five lug) |
| Thickness | 0.625 inch |
| Center bore | 2.800 |
| Stud hole diameter | 0.562 |
| Spacer outside diameter | 6.000 |
| Lug holes | 5 |
| Material | 6061-T6 billet aluminum |
| Finish | Clear anodized |
| Color | Silver |
| Grade type | Premium |
| Sold as | Pair |
| Country of origin | US |
Vehicle fitment
Suitability depends on the bolt pattern, hub bore and stud length. The spacer is built for the 5×4.25, 5×4.50 and 5×4.75 five-lug patterns.
Measure your bolt pattern and make sure the 2.800 center bore matches your hub. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Baer’s guidance is that stock studs often tolerate no more than 1/4 inch (.250) of spacer, although that varies by vehicle, so measure thread engagement before mounting. Mounting hardware is not included, so choose studs or bolts long enough to clear the 5/8 inch thickness.
After installation, confirm the wheel seats fully and that the studs still show enough thread through the lug nuts.
What’s included
Two 0.625 inch aluminum wheel spacers, sold as one pair.
Not included: mounting hardware, so studs or bolts must be supplied separately.












