Overview
The Baer Brakes 2000052 is a pair of premium 6061-T6 aluminum five-lug wheel spacers, 0.500 inch (1/2 inch) thick, for 5×100 and 5×108 bolt patterns. A wheel spacer moves the wheel outward on the hub. Baer lists improved appearance, a wider track and added brake caliper clearance as the main reasons to use them.
Each spacer is machined in-house in the USA from 6061-T6 billet aluminum and finished in clear anodized silver. It has a 2.800 inch center bore, a 6.000 inch outside diameter and five 0.562 inch stud holes. These spacers are not built for a single model, so fit depends on your hub. Check your hub’s center diameter before fitting, since a hub-centric match depends on it.
Key features
- Two spacers per pair, each 0.500 inch thick
- Five-lug design for 5×100 and 5×108 bolt patterns
- Machined from 6061-T6 billet aluminum
- Clear anodized silver finish
- Brand lists improved appearance, a wider track and increased brake clearance as benefits
- Made in the USA, country of origin US
Choosing spacer thickness
Wheel spacers move the wheel outward, which changes track width, scrub radius and how the wheel clears the brake caliper. They also change the load on the wheel studs and the hub bearing, since the wheel sits farther from the mounting face. Choose the thinnest spacer that gives the clearance you need, and avoid stacking spacers, which adds more leverage on the studs.
Hub-centric fit matters for a steady ride. A spacer centered only by the lug studs relies on the studs to hold the wheel true, while a hub-centric spacer locates on the hub itself. Clean the mating surfaces and check for rust, then torque lug nuts in a star pattern. Re-check torque after the first drive and again after a short distance, because aluminum and steel settle at different rates.
- Use longer studs or lug bolts sized for the spacer
- Clean the hub and spacer faces before mounting
- Re-torque after the first drive
- Avoid stacking two spacers on one hub
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000052 |
| UPC | 844165004844 |
| Bolt pattern | 5×100 and 5×108 |
| Lug hole quantity | 5 |
| Thickness | 0.500 inch (1/2 inch) |
| Center bore | 2.800 inch |
| Stud hole diameter | 0.562 inch |
| Spacer outside diameter | 6.000 inch |
| Material | 6061-T6 billet aluminum |
| Finish | Clear anodized |
| Color | Silver |
| Quantity | Pair (2 spacers) |
| Mounting hardware included | No |
| Country of origin | US |
Vehicle fitment
The spacers are not built for a single model, so match them to your hub by bolt pattern (5×100 or 5×108), 2.800 inch center bore and 0.562 inch stud holes, and confirm the spacer suits your application.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Most cars cannot take more than 1/4 inch (.250) of spacer with stock studs, so the limit varies by vehicle. Check thread engagement on the studs before adding spacers, and use wheel studs or lug bolts of the proper length for the added thickness. A stud or lug bolt that is too short for the spacer can lose thread engagement, so confirm it before driving.
What’s included
A pair of Baer Brakes wheel spacers, two spacers in total, each 0.500 inch thick.
Not included: Mounting hardware. You need your own wheel studs or lug bolts that are long enough for the spacer.












