Overview
The Baer Brakes 2000051 is a pair of 0.375 inch thick aluminum 5-lug wheel spacers for 5×108 and 5×100 bolt patterns. A wheel spacer sits between the wheel and the hub and pushes the wheel outward, which can increase brake clearance, widen the track and change the wheel’s appearance. Each spacer is machined from 6061-T6 billet aluminum and finished in clear anodized silver.
Baer sells this part as a Premium grade spacer, packed as a pair. It suits owners who already know their hub uses a 5×108 or 5×100 bolt pattern with a 2.800 inch center bore. No vehicle fitment is listed, so check those dimensions, the stud hole size and your studs before fitting it.
Key features
- Increased brake clearance
- Wider track from the outward offset
- Improved wheel appearance
- Precision-machined 6061-T6 billet aluminum body
- Clear anodized silver finish
- Five lug holes per spacer for 5×108 and 5×100 patterns
- Sold in pairs and made in the USA
Choosing the right setup
Wheel spacers change the load path between the wheel and the hub, so the studs carry the wheel further from the mounting face than stock. Thread engagement is the first thing to measure. Lug nuts should seat fully on the stud threads with room to spare, and a stud that bottoms out early is a safety problem regardless of how the spacer looks.
Thicker spacers also shift the wheel’s position relative to the fender and suspension. Tire clearance, steering lock and driveline angles can change, so road test slowly after installation and look for rubbing at full turn. The spacer should center on the hub so the wheel does not rely only on the lugs.
- Measure stud thread engagement before fitting
- Use longer studs or extended lug nuts if needed
- Recheck lug torque after the first drives
- Inspect spacer faces for corrosion or galling each season
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000051 |
| UPC | 844165004837 |
| Material | 6061-T6 billet aluminum |
| Finish | Clear anodized |
| Color | Silver |
| Thickness | 0.375 inch |
| Bolt pattern | 5×108, 5×100 |
| Lug holes | 5 |
| Center bore | 2.800 inch |
| Stud hole | 0.562 inch |
| Spacer OD | 6.000 inch |
| Quantity | Pair (2 spacers) |
| Grade | Premium |
| Country of origin | US |
Vehicle fitment
The Baer Brakes 2000051 is made for 5-lug wheels with a 5×108 or 5×100 bolt pattern, a 2.800 inch center bore and 0.562 inch stud holes. Match the spacer to your hub using those measurements, then verify fit against your vehicle’s year, model and trim before ordering.
Fitment is not confirmed for any specific make or model here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
In many cases stock studs cannot take more than 1/4 inch (.250) of spacer thickness, and at 0.375 inch this spacer exceeds that figure. Confirm you have studs of the proper length for the added thickness before installing. Mounting hardware is not included, so check thread engagement before adding spacers.
What’s included
2 wheel spacers, sold as one pair.
Not included: mounting hardware.












