Overview
The Baer Brakes 2000005 is a 0.750 inch thick wheel spacer set in premium clear anodized aluminum, sold as a pair for 4-lug wheels on the 4×100, 4×108 and 4×114.3 bolt patterns. Spacers of this kind slide between the hub and the wheel to move the wheel outward, which can create room for brake calipers and rotors.
The 2000005 is machined from 6061-T6 billet aluminum in the USA and is universal-fit rather than built for one vehicle. Its suitability depends on the bolt pattern, center bore and stud length of your own hub, so take those measurements before you buy.
Key features
- Pair of 0.750 inch thick aluminum spacers
- Bolt patterns 4×100, 4×108 and 4×114.3
- 6061-T6 billet aluminum build
- Clear anodized silver finish
- Four lug holes at 0.562 inch diameter
- Premium grade, made in the USA
Checking brake clearance
Brake clearance is the main reason owners fit a spacer of this type. A spacer moves the wheel outward, so the wheel can clear a larger caliper or rotor, but it also moves the tire closer to the suspension and fender. Test the fit with the wheel mounted, then turn the steering from lock to lock and watch for contact at the inner fender, tie rod and strut.
Think about the wheels you plan to run. A wheel with lower offset pushes the tire outward further, so the combined effect of spacer and wheel offset decides the final position. Keep the spacer faces flat and clean, and inspect the bore for cracks at each service. If one spacer shows wear, replace the pair so both sides sit the same.
- Test steering lock with the wheel mounted
- Replace spacers in pairs
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000005 |
| UPC | 844165004660 |
| Quantity | Pair (2 wheel spacers) |
| Material | 6061-T6 billet aluminum |
| Finish | Clear anodized |
| Color | Silver |
| Thickness | 0.750 inch |
| Spacer outside diameter | 6.000 inch |
| Center bore | 2.560 inch |
| Stud hole diameter | 0.562 inch |
| Lug hole quantity | 4 |
| Bolt hole pattern | 4×100, 4×108, 4×114.3 |
| Mounting hardware included | No |
| Grade | Premium |
| Country of origin | US |
Vehicle fitment
Baer names no vehicle year, make or model for the 2000005. Being universal-fit, it is matched by bolt pattern (4×100, 4×108 or 4×114.3), a 2.560 inch center bore and 0.562 inch stud holes rather than by a model list.
A universal-fit spacer will not confirm brake or wheel clearance for any particular setup, so check clearance on the vehicle itself. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Stud length is the main concern with this 0.750 inch spacer. Baer says most cars cannot take more than 1/4 inch (.250) of spacing with stock studs, so measure your current stud exposure first and fit longer studs as needed for full lug nut engagement. Clean the hub face and the spacer mating surface before installing, and recheck lug torque after the first drive.
What’s included
Two 6061-T6 aluminum wheel spacers, each 0.750 inch thick, sold as a pair.
Not included: Mounting hardware, meaning studs and lug nuts.












