Overview
The Baer Brakes 2000043 is a pair of 0.125 inch (1/8 inch) thick wheel spacers for five-lug wheels with 5×5.0 and 5×5.50 bolt patterns. It moves the wheel further out on the hub, which adds brake caliper clearance and a wider track.
The spacer is precision machined with a 3.060 inch center bore and a silver zinc plated finish. It is sized by bolt pattern, center bore and stud length, so match those three figures to your hub before fitting.
Key features
- Pair of spacers, two pieces per set
- Zinc plated finish in silver color
- Five-lug layout for 5×5.0 and 5×5.50 bolt patterns
- 3.060 inch center bore
- 0.625 inch lug (stud) holes
- 0.125 inch (1/8 inch) thickness for added brake clearance
- It can widen the track and give the wheels a more filled-out look.
Choosing a spacer thickness
Spacer thickness is the first decision. A thinner spacer keeps the wheel closer to the factory position and places less load on the studs, while a thicker one gives more caliper room but demands longer studs and more careful thread checks. Measure how far your current studs reach past the lug nut before deciding, and remember that a spacer changes the wheel’s offset, which affects steering feel and tire contact at full lock.
Wheel spacers are often paired with longer studs or extended lug nuts, and some owners also inspect the wheel bearings and axle seals when the hub moves outward. Look for tires that still clear the fender lip and inner liner once the spacer is in place. Between drives, check the stud threads and nut seats for galling or flattening, and retighten the nuts after the first short trips.
- Check thread engagement on each stud
- Verify tire clearance at full steering lock
- Inspect studs and nut seats for wear
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000043 |
| UPC | 844165034179 |
| Spacer type | Five-lug wheel spacer, sold as a pair |
| Bolt pattern | 5×5.0 and 5×5.50 |
| Lug holes | 5 |
| Thickness | 0.125 inch (1/8 inch) |
| Center bore | 3.060 inch |
| Lug hole diameter | 0.625 inch |
| Spacer outside diameter | 7.000 inch |
| Finish | Zinc plated |
| Color | Silver |
| Grade type | Premium |
| Country of origin | US |
| Mounting hardware included | No |
Vehicle fitment
The set is not matched to a specific year, make, model or trim. It is sized for 5×5.0 and 5×5.50 five-lug hubs by bolt pattern, center bore and stud length.
Before ordering, make sure your year, model and trim suit a 5×5.0 or 5×5.50 hub.
Installation notes
Baer’s notes warn that stock studs in many cases cannot take more than 1/4 inch (.250) of spacing, so check how far the studs thread through the nut with the 0.125 inch spacer in place. Mounting hardware is not included, so longer wheel studs or lug bolts may be needed.
Confirm every lug nut has full thread engagement before driving, since a short stud can fail under load.
What’s included
One pair of Baer Brakes wheel spacers, with two wheel spacers in the set.
Not included: Mounting hardware. Longer wheel studs or lug bolts are needed if your current studs do not fully engage through the spacer.












