Overview
The Baer Brakes 2000037 is a pair of 0.375 inch (3/8 inch) thick aluminum wheel spacers for a 6×4.50 bolt pattern, with 6 lug holes on a 4.5-inch circle. Each spacer sits between the hub and the wheel and moves the wheel outward. Baer lists improved brake clearance, a wider track and appearance among the reasons to fit one.
Made from 6061-T6 billet aluminum with a clear anodized silver finish, these measure 3.075 center bore, 0.562 stud holes and 6.500 spacer outer diameter. A 3/8 inch spacer is thicker than the 1/4 inch figure usually cited for stock studs, so longer studs will likely be needed. Vehicle fit depends on the bore, stud holes and bolt pattern.
Key features
- 0.375 inch (3/8 inch) thickness
- Six lug holes with 0.562 stud holes
- Machined from 6061-T6 billet aluminum
- Clear anodized silver finish
- 2 spacers per pair
- Baer lists increased brake clearance and a wider track as benefits
- Manufactured in the USA.
Choosing the right thickness
Spacer thickness is a trade-off. A thicker spacer gives more brake caliper clearance and a wider stance, but it also moves more leverage onto the studs and the wheel bearing. Thinner spacers are less demanding on the hardware, so the right choice depends on what the vehicle needs to clear and how the studs are sized.
Clearance is only one check. Look at how the wheel sits against the fender at full lock and whether the lug nut still seats fully on the stud. Thread engagement matters because a thicker spacer shortens what the nut grips, so the spacer and fastener should be treated as one set.
- Measure caliper and fender clearance before and after fitting
- Keep the spacer faces clean and free of corrosion
- Retorque after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000037 |
| UPC | 844165004745 |
| Bolt pattern | 6×4.50 (6 lug holes) |
| Thickness | 0.375 inch |
| Center bore | 3.075 |
| Stud hole diameter | 0.562 |
| Spacer outer diameter | 6.500 |
| Material | 6061-T6 billet aluminum |
| Finish | Clear anodized |
| Color | Silver |
| Sold as | Pair |
| Mounting hardware included | No |
| Country of origin | US |
Vehicle fitment
Match the 6×4.50 bolt pattern and 3.075 center bore to your hub, and confirm the stud length before choosing this 3/8 inch thickness.
Confirm your vehicle’s year, model and trim before ordering. Compare the 6×4.50 pattern and 3.075 center bore first.
Installation notes
Mounting hardware is not included, so studs or lug nuts must be supplied separately. Because this spacer is thicker than Baer’s 1/4 inch (.250) stock-stud figure, longer studs with more thread engagement will likely be needed.
Check every stud for full thread engagement before driving, since a loose wheel is a serious hazard.
What’s included
One pair of 6061-T6 aluminum wheel spacers, 2 spacers in total.
Not included: Wheel studs, lug nuts and mounting hardware.












