Overview
The Baer Brakes 2000036 is a pair of 0.25 inch (1/4 inch) thick aluminum wheel spacers for a 6×4.50 bolt pattern and six lug holes. The spacer mounts between the hub and wheel to move the wheel outward. Baer names brake clearance and track width as the main reasons to fit one.
The 2000036 is machined from 6061-T6 billet aluminum with a clear anodized silver finish. It has a 3.075 center bore, 0.562 stud holes and a 6.500 spacer outer diameter. At 0.25 inch thick, it matches the 1/4 inch (.250) stock-stud size, but stud engagement may still be short at this thickness, so check thread engagement before fitting.
Key features
- 0.25 inch (1/4 inch) thickness
- Six lug holes with 0.562 stud holes
- 6061-T6 billet aluminum construction
- Clear anodized silver finish
- 2 spacers in a pair
- Baer lists brake clearance and a wider track as benefits
- Made in the USA.
Before you fit spacers
A wheel spacer moves the wheel outward on the hub, which changes the clearance between the tire and the fender, control arms and brake calipers. The wheel sits farther out, so the load on the hub, wheel bearings and studs changes. Spacers can also shift scrub radius, so the rest of the setup should be checked after fitting.
Stud length is the usual problem. A spacer uses up part of the stud threads, and the lug nut needs enough engagement to hold safely. Longer studs are often fitted together with a spacer. Examine the existing studs for thread wear, rust or stretching before reusing them.
After the first drive, re-check the lug nut torque, since the wheel can settle against the spacer face. Inspect the spacer surfaces for corrosion and check the fit regularly, especially on rough trails where the wheels take more hits.
- Measure the stud length needed for the spacer thickness
- Replace studs that show thread damage or rust
- Clean the hub and spacer faces before mounting
- Re-check lug nut torque after the first drive
- Check wheel clearance at full steering lock
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000036 |
| UPC | 844165004738 |
| Bolt pattern | 6×4.50 (6 lug holes) |
| Thickness | 0.25 inch |
| Center bore | 3.075 |
| Stud hole diameter | 0.562 |
| Spacer outer diameter | 6.500 |
| Material | 6061-T6 billet aluminum |
| Finish | Clear anodized |
| Color | Silver |
| Sold as | Pair |
| Mounting hardware included | No |
| Country of origin | US |
Vehicle fitment
Confirm your vehicle’s year, model and trim before ordering. The 6×4.50 pattern and 3.075 center bore are the first fit points to verify.
Installation notes
Mounting hardware is not included, so studs or lug nuts need to be supplied. At 0.25 inch, this spacer is the thinnest of the group in its line, and Baer’s guidance still applies to stock studs, so confirm the thread engagement you have.
Tighten each fastener only once the wheel is seated, and check engagement again before driving.
What’s included
One pair of 6061-T6 aluminum wheel spacers, 2 spacers in total.
Not included: Wheel studs, lug nuts and mounting hardware.












