Overview
The Baer Brakes Premium Aluminum 5-Lug Wheel Spacers, part number 2000012, are 0.75 inch (3/4 inch) thick spacers for five-lug wheels that use 5×4.25, 5×4.50 or 5×4.75 bolt patterns. Each spacer moves the wheel outward on the hub, which adds brake clearance and widens the track.
Each spacer moves the wheel outward on the hub, so it suits builds that need more spacing than a thin spacer gives without going to a much thicker part. The spacers are machined from 6061-T6 billet aluminum with a clear anodized silver finish, and they have a 2.800 center bore, a 6.000 outside diameter and five stud holes measuring 0.562. They are sold as a pair.
Key features
- 0.75 inch (3/4 inch) thickness for added wheel spacing and brake clearance
- Machined from 6061-T6 billet aluminum
- Clear anodized finish in silver
- Five lug holes with 0.562 stud holes
- 2.800 center bore and 6.000 outside diameter
- Sold as a pair, with two spacers included
- Manufactured in the USA with US-sourced 6061-T6 aluminum.
Choosing the right spacer thickness
Spacer thickness is a trade-off. A thicker spacer clears more brake or fender contact, but it also moves the wheel further from the hub and increases the leverage on the studs. Thin spacers are often chosen first because they keep the load path closer to the factory setup, and a thicker one is only needed when clearance is genuinely short. Before deciding, check the brake caliper, the tire sidewall and the inner fender at full steering lock so you know where the limit is.
Spacers are often fitted alongside longer wheel studs or bolts, and that combination should be planned together. Stud length depends on the spacer thickness plus the wheel’s seat depth, so measure before buying hardware. Once installed, recheck the lug torque after the first drive, look for fretting on the spacer faces, and retorque after any tire or wheel service. Keep the mating surfaces clean, because grit between the spacer and hub is a common reason for loose wheels.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000012 |
| UPC | 844165002406 |
| Bolt pattern | 5×4.25, 5×4.50, 5×4.75 (five lug) |
| Thickness | 0.75 inch |
| Center bore | 2.800 |
| Stud hole diameter | 0.562 |
| Spacer outside diameter | 6.000 |
| Lug holes | 5 |
| Material | 6061-T6 billet aluminum |
| Finish | Clear anodized |
| Color | Silver |
| Grade type | Premium |
| Sold as | Pair |
| Country of origin | US |
Vehicle fitment
Suitability depends on the bolt pattern, hub bore and stud length, and the spacer is made for the five-lug patterns 5×4.25, 5×4.50 and 5×4.75.
Measure your wheel’s bolt pattern and confirm the 2.800 center bore suits your hub before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting hardware is not included, so you will need studs or bolts long enough to hold the wheel with the spacer in place. Baer cautions that most cars cannot take more than 1/4 inch (.250) of spacer on stock studs, and that this is not always the case, so check thread engagement before mounting.
Recheck the thread engagement after the spacer is installed, because a 0.75 inch spacer changes how far each stud projects through the wheel.
What’s included
Two 0.75 inch aluminum wheel spacers, sold as one pair.
Not included: mounting hardware. Studs or bolts of suitable length must be supplied separately.












