Overview
The Baer Brakes 2000003 is a pair of premium 6061-T6 aluminum 4-lug wheel spacers, 0.5 inch thick, for wheels with 4×100, 4×108 or 4×114.3 bolt patterns. Moving the wheel outward on the hub widens the track and gives the brake caliper more room. The package holds two spacers. It is a universal-fit part, so the bolt pattern, hub and stud length must match your vehicle.
The spacers are precision-machined in-house from 6061-T6 billet aluminum with a clear anodized silver finish. The center bore is 2.560 inches, the lug holes are 0.562 inch, and the outside diameter is 6.000 inches. They are made in the USA, and the country of origin is US.
Key features
- Four-lug design for 4×100, 4×108 and 4×114.3 bolt patterns
- Premium 6061-T6 billet aluminum construction
- 0.5 inch thickness for added wheel spacing
- Designed to widen the track
- Designed to increase brake clearance
- Designed to improve appearance
- Clear anodized silver finish
- Sold as a pair with two spacers included
- Proudly made in the USA
Before you buy
Wheel spacers change where the wheel sits relative to the hub, so the studs carry the wheel at a new position. Thicker spacers need studs that extend far enough through the nut to hold securely, and the lug nuts must seat fully against the spacer. Before buying, measure your current stud exposure and compare it with the thickness of the spacer you plan to use.
Half-inch spacers add more offset than thinner options. That can change steering geometry, wheel bearing load and clearance to fenders or suspension parts, especially on a lifted or heavily loaded vehicle. If your clearance is only marginal, a thinner pair may be the better first step, and you can reassess after the first drives.
- Torque lug nuts to the value for your wheel and stud type after installation
- Re-check torque after the first few drives
- Inspect spacer faces for scoring or corrosion during tire rotations
- Clean the anodized finish with mild soap and water
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000003 |
| UPC | 844165004646 |
| Material | 6061-T6 billet aluminum |
| Grade type | Premium |
| Finish | Clear anodized |
| Color | Silver |
| Thickness | 0.5 inch |
| Bolt patterns | 4×100, 4×108, 4×114.3 |
| Lug holes | 4 |
| Lug hole diameter | 0.562 inch |
| Center bore (inside diameter) | 2.560 inch |
| Spacer outside diameter | 6.000 inch |
| Quantity sold | Pair, 2 spacers |
| Mounting hardware included | No |
| Country of origin | US |
| Emission code | 6 |
Vehicle fitment
Match the pair to your wheel’s bolt pattern (4×100, 4×108 or 4×114.3) and to the hub and stud requirements of your vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check thread engagement on your studs before adding spacers. In many cases, most cars cannot take more than 1/4 inch (.250) with stock studs, and that is not always the case, so confirm stud length before installation. Use studs and nuts of the proper length for the added thickness, because mounting hardware is not included with this pair.
What’s included
One pair of Baer Brakes 6061-T6 aluminum wheel spacers, 2 spacers in total, 0.5 inch thick.
Not included: mounting hardware.












