Overview
The Baer Brakes 2000004 is a 0.625 inch thick aluminum wheel spacer, sold as a pair in clear anodized silver, for 4-lug wheels on the 4×100, 4×108 and 4×114.3 bolt patterns. It moves the wheel outward by its thickness, 0.625 inch, so check that added offset against your own clearance needs.
Each spacer is machined from 6061-T6 billet aluminum in the USA. Baer presents the 2000004 as universal-fit, so the match depends on bolt pattern, center bore and stud holes rather than on a specific year or model. Measure your hub and studs before ordering, since those dimensions decide whether the spacer seats correctly.
Key features
- Pair of 0.625 inch thick spacers
- Covers 4×100, 4×108 and 4×114.3 bolt patterns
- Billet 6061-T6 aluminum with clear anodized finish
- Silver color with 2.560 inch center bore
- Stud holes 0.562 inch in diameter, four per spacer
- Built in the USA and graded Premium
Choosing the right setup
A wheel spacer pushes the wheel outward on the hub, so the first thing to weigh is how much extra offset your vehicle can handle. A 0.625 inch spacer changes where the tire sits relative to the fender, the suspension and the brake caliper, and each of those can limit how far out the wheel can go. Look at the tire’s width and the clearance you have at the inner edge of the wheel before you settle on this thickness.
Stud length is the other decision that tends to get overlooked. A spacer lengthens the path the lug nut has to travel, so the factory studs may not provide enough thread engagement once the spacer is in place. Longer studs of the correct thread and seat type are usually installed at the same time, and the lug nuts should match the seat style of the wheel. Plan on buying the hardware together with the spacers rather than reusing the originals.
Wheel bearings and hub surfaces are also worth a look during installation. Clean the hub face and the back of the spacer so no debris sits between them, and check that the spacer sits flat before the wheel goes on.
- Check the lug pattern and center bore against the hub
- Confirm brake caliper and fender clearance at the new offset
- Buy longer studs and matching lug nuts
- Clean the hub face and spacer surfaces before mounting
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000004 |
| UPC | 844165004653 |
| Quantity | Pair (2 wheel spacers) |
| Material | 6061-T6 billet aluminum |
| Finish | Clear anodized |
| Color | Silver |
| Thickness | 0.625 inch |
| Spacer outside diameter | 6.000 inch |
| Center bore | 2.560 inch |
| Stud hole diameter | 0.562 inch |
| Lug hole quantity | 4 |
| Bolt hole pattern | 4×100, 4×108, 4×114.3 |
| Mounting hardware included | No |
| Grade | Premium |
| Country of origin | US |
Vehicle fitment
No vehicle year, make or model is named for the 2000004. It is universal-fit, so the lug pattern (4×100, 4×108 or 4×114.3), 2.560 inch center bore and 0.562 inch stud holes are what decide compatibility.
Because the spacer is not built for one vehicle, clearance against brake calipers, fenders and wheel offset must be checked on the vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Start by checking thread engagement, since that limit matters most. Stock studs set the limit, and Baer quotes 1/4 inch (.250) as the most that many vehicles can take, so a 0.625 inch spacer usually calls for longer studs of the correct length. Install with clean mating surfaces, and recheck lug torque after the first drive. Studs and lug nuts are not part of the package, so buy hardware that suits the spacer.
What’s included
Two 6061-T6 aluminum wheel spacers, each 0.625 inch thick, sold as a pair.
Not included: Studs and lug nuts.












