Overview
The Baer Brakes Premium Aluminum 5-Lug Wheel Spacers, part number 2000044, are 0.25-inch (1/4 inch) thick wheel spacers sold as a pair for 5×5.0 and 5×5.50 bolt hole patterns. Baer Brakes positions them as a way to add wheel spacing for better brake clearance, a wider track and a changed wheel stance.
Each spacer is precision machined in-house from 6061-T6 billet aluminum with a clear anodized silver finish. The faces are machined flat and true, and the spacers are made in the USA. Fitment depends on the bolt pattern, hub bore and stud length, so check those three before buying.
Key features
- Pair of 0.25-inch (1/4 inch) thick aluminum spacers
- 6061-T6 billet aluminum, precision-machined in-house
- Clear anodized finish in silver
- Intended to add brake clearance and widen the track
- Lists 5×5.0 and 5×5.50 bolt hole patterns with five lug holes
- Center bore 3.075 and stud hole diameter 0.625
- Made in the USA, grade type Premium
Stud and nut selection
Thin spacers still change how the wheel seats, so the stud you use needs enough length to hold a full nut with clamp load. Count the threads that engage the nut before and after fitting. Studs and lug nuts with a conical or ball seat should match the wheel’s seat type.
Once the spacer is on, the hub face becomes a second mating surface. Keep it clean and free of paint or rust, and avoid anti-seize on the studs unless the wheel maker directs it. Retorque after the first few drives and check the nuts at each tire rotation. Look for cracks around the lug holes during routine inspections.
- Match nut seat type to the wheel
- Measure stud protrusion after fitting
- Wipe hub and spacer faces clean before mounting
- Recheck torque at each tire rotation
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000044 |
| UPC | 844165004790 |
| Material | 6061-T6 billet aluminum |
| Finish | Clear Anodized |
| Color | Silver |
| Thickness | 0.25 Inch |
| Bolt hole pattern | 5×5.0, 5×5.50 |
| Lug hole quantity | 5 |
| Lug hole diameter | 0.625 |
| Center bore (inside diameter) | 3.075 |
| Spacer OD | 7.000 |
| Sold as | Pair |
| Box count | 2 |
| Mounting hardware included | No |
| Grade type | Premium |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
The spacers are sized by bolt pattern: five-lug 5×5.0 and 5×5.50, with a 3.075 inch center bore. Confirm the hub, wheel and stud pattern match before ordering.
Confirm your vehicle’s year, model and trim before ordering. A wheel that does not center on the hub or that uses a different lug pattern will not work with these spacers.
Installation notes
Thread engagement is the main installation check. Make sure there is enough thread engagement on the studs before adding spacers. In many cases stock studs cannot take more than 1/4 inch, though that is not always the case. Use wheel studs of the proper length for the added thickness, and confirm the fit before driving.
What’s included
One pair of 0.25-inch aluminum wheel spacers, with a box count of 2.
Not included: Mounting hardware is not included, so wheel studs or nuts of the correct length must be sourced separately.












