Overview
The Mishimoto Borne Off-Road 6×139.7 wheel spacer kit, part number BNWS-001-250BK, is a black aluminum spacer for Jeep and truck wheels with a 6 on 5.5 bolt pattern and a 93.1 mm center bore. Wheel spacers move the wheel outward on the hub, which the brand says helps with brake clearance, added track width and tire rub. Borne Off-Road has expanded its spacer line to cover several thread patterns, center bores and thicknesses, and this kit is one of them.
The spacer is 25mm thick, or 1 inch; check the marking on your kit before fitting. No specific vehicle applies, so match the bolt pattern, center bore and thickness to your wheels and hub. Each spacer is forged from 6061-T6 aluminum, offering a blend of strength and lightness.
Key features
- Forged 6061-T6 aluminum spacers
- Grade 12.9 steel studs and lug nuts
- Hub-centric design that extends the axle hub for precise wheel fit
- Anodized finish for corrosion protection; the kit is listed in black
- Kit of two spacers with pre-installed studs
- Covered by the brand’s Lifetime Warranty
Clearance and hardware checks
Wheel spacers move the wheel outward on the hub, which changes how the wheel sits against the fender, brake caliper and suspension parts. Check clearance at full steering lock and with the suspension compressed, since a spacer that clears at rest can rub during travel. Because the spacer changes leverage on the wheel bearings and studs, confirm the hardware is seated and tight.
Hub-centric spacers depend on the center bore matching the hub, so a precise fit is important for steady running. Re-check lug nut torque after the first short drive and again after the first longer trip. Inspect the studs and spacer faces periodically for corrosion or fretting, and clean the mating surfaces before reinstalling.
- Check brake caliper clearance
- Confirm studs and nuts engage fully
- Re-torque after initial drives
Specifications
| Brand | Mishimoto |
|---|---|
| Part number | BNWS-001-250BK |
| Adapter or spacer | Spacer |
| Bolt pattern | 6 on 5.5 (6×139.7 in title) |
| Center bore | 93.1 mm |
| Thickness | 1 inch (25mm) |
| Color | Black |
| Material | 6061-T6 aluminum |
| Studs and lug nuts | Grade 12.9 steel |
| Finish | Anodized (black listed) |
| Quantity | Two spacers per kit |
Vehicle fitment
This kit is sized by bolt pattern, center bore and thickness rather than by vehicle. Match 6 on 5.5, the 93.1 mm center bore and the thickness to your hub and wheels. Hub-centric spacers rely on the center bore to center the wheel, so a bore mismatch matters as much as the thickness.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The studs come pre-installed, so the spacers mount on the hub with the included hardware. Because the spacer moves the wheel outward, check brake caliper and suspension clearance and tire rub after installing.
What’s included
Each kit contains two wheel spacers with pre-installed studs and the hardware needed for installation.
Not included: wheels and tires.









