Overview
The Baer Brakes 4261409B is a black-caliper front Extreme Plus brake kit for the 2010–2026 Ford F-150. It covers 2WD and 4WD trucks, including the Raptor, and uses a 6-piston 6S monoblock caliper with a 15 inch two-piece slotted, drilled rotor.
Owners upgrading front stopping hardware on an F-150 get a complete front package: caliper, rotor and mounting brackets with hardware. Baer rates this kit as a performance grade, and the caliper is built in Phoenix, AZ from US-sourced 2618 aluminum forging.
Key features
- Monoblock 6-piston 6S caliper with staggered pistons for more even pad wear
- Stainless steel pistons, abutments and noise suppression clips for quieter operation
- Dual seals for dust, weather and pressure protection
- Two-piece slotted, drilled, zinc-plate rotor with billet aluminum hat
- Rotors pre-assembled with NAS high grade stainless hardware
- Mounting brackets and hardware included
- Powder coated finish
Owner maintenance and wear signs
A front brake kit wears in stages, starting with pad material and then the rotor surface. Slotted and drilled rotors help clear debris and gas, but the drilled holes can also collect dust and moisture, so a quick look after wet driving is useful. Pads that squeal or grind, or a pulsing pedal or steering wheel shake, usually signal that the rotor or pad needs attention.
Keeping the caliper slide pins clean and lubricated lets the pads release evenly and prevents pull to one side. Black finished calipers can show brake dust more quickly, so wipe them down periodically to keep the finish in good condition. Re-torque the wheel lug nuts after the first short drive following installation, since the rotor may seat slightly against the hub.
- Inspect rotor surface for scoring
- Clean and lubricate caliper slide pins
- Listen for squeal or grinding
- Check lug nut torque after first drive
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261409B |
| UPC | 844165047421 |
| Sold as | Kit |
| Axle | Front |
| Drive | 2WD, 4WD |
| Caliper | 6S, 1-piece monoblock, 6-piston, fixed |
| Caliper color | Black |
| Pad type (FMSI) | D1247 |
| Rotor diameter | 15.0 inch |
| Rotor thickness | 1.25 |
| Rotor type | 2-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor material | Iron with aluminum hat |
| Brake hoses | Re-uses OE hoses |
| Front rotor included | Yes |
| Lug count | 6 lug |
| Wheel bolt pattern | 6x135mm |
| Minimum wheel diameter | 19.0 inch |
| Template | N063U |
| Grade | Performance |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
This kit fits the 2010–2026 Ford F-150 in 2WD and 4WD form, including the Raptor.
Installation notes
Because the OE hoses are re-used, plan on keeping the factory hose routing. Compare the N063U template with the wheel you plan to run, as the minimum wheel diameter is 19.0 inch. A qualified technician should install the kit and bleed the brakes, since brake changes alter stopping performance.
What’s included
The kit includes the black 6S caliper, the 15.0 inch two-piece front rotor, and the mounting brackets and hardware.
Not included: Lug nuts.














