Overview
The Baer Brakes Claw 902018-020 is a pair of rear cross-drilled and slotted replacement brake rotors for the 2024-2025 Toyota Tacoma SR, SR5 and TRD PreRunner. It takes the place of the factory rear rotor on these trucks.
The friction surface is both slotted and cross-drilled. The slots and drilled holes give gases and dust formed between pad and rotor a way out during braking, which Baer says supports a more consistent pedal feel and reduced brake fade. Each rotor is one-piece full cast cast iron, mill balanced, and zinc plated for a bright finish behind open-center wheels. The drilled holes are chamfered to minimize stress cracking.
Key features
- Cross-drilled and slotted friction surface that lets gases and dust escape from between pad and rotor
- Premium, mill balanced, direct replacement rotor
- Chamfered cross-drilled holes to minimize stress cracking
- Zinc-plated finish for a bright appearance in open-center wheels
- Vented, directional brake surface with rust resistant coating
Pad and rotor pairing
Rotors and pads work as a pair, so the pad compound changes how a cross-drilled and slotted surface performs. Firmer compounds tend to leave more dust and can wear rotors faster, while softer street compounds bed in quickly but may fade sooner under repeated hard stops. Pick pads suited to how the truck is used, whether daily commuting, towing or trail driving with frequent stops.
Vented, drilled rotors reward a controlled break-in. A series of moderate stops lays an even pad layer on the friction surface, which helps prevent pulsation. Check the rotor edges and drilled holes at each pad change for cracking, and replace rotors that have worn to the minimum thickness or show deep grooving. Replacing pads and rotors together keeps wear even across both sides of the axle.
- Match pad compound to your driving
- Replace pads and rotors together when wear is uneven
- Torque lug nuts to the vehicle specification after the first stops
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 902018-020 |
| UPC | 90127971277 |
| Axle | Rear |
| Packaging | Set (pair) |
| Construction | One piece, full cast |
| Material | Cast iron |
| Rotor type | Vented, conventional |
| Brake surface | Directional |
| Surface type | Slotted and cross-drilled |
| Disc finish | Zinc plated |
| Grade | Premium |
| Outside diameter | 309 mm (12.2 in) |
| Nominal thickness | 18 mm (.709 in) |
| Discard thickness | 16.5 mm (.649 in) |
| Overall height | 59 mm (2.323 in) |
| Center hole diameter | 97 mm (3.819 in) |
| Stud/lug hole quantity | 6 |
| Stud/lug hole circle diameter | 5.5 |
| Rust resistant coating | Yes |
| ABS tone ring included | No |
| Country of origin | USA |
Vehicle fitment
It is a rear axle part and fits the 2024-2025 Toyota Tacoma SR, SR5 and TRD PreRunner. It does not cover front brakes.
The TRD Pro trim is not part of this fitment, and other Tacoma generations and the Toyota Tundra are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It does not cover the TRD Pro trim, other Tacoma generations or the Toyota Tundra. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A pair of Baer Claw cross-drilled and slotted rear rotors, supplied as a set.
Not included: ABS tone ring.
