Overview
The Baer Brakes 6910922 is a 2-piece left-side replacement rotor ring measuring 13.000 inches across and 0.81 inch thick. It is used in the TRACK+ system and in certain Baer Pro Plus and other Baer Brake systems, with a slotted, drilled and zinc-plated finish.
Built as a vented cast iron ring, it is directional and made for the left side of the vehicle only. Its curved vanes aid cooling, and the ring is dynamically balanced for steady, low-vibration running. Rotors are sold individually, so the right side needs its own separate ring.
Key features
- Left-side directional rotor ring
- Slotted, drilled and zinc-plated braking surface
- Curved vane design that helps cooling
- Dynamic balance for steady, low-vibration running
- Two-piece construction with Performance grade type
Before you buy
Brake rotors wear down with use, and the braking surface, outer edge and hub face all affect how the ring runs. Before ordering a replacement, look at the old rotor for deep grooves, a raised lip at the outer edge, heat cracks or blue discoloration. Any of these is a sign it should be replaced, and a rotor worn below its minimum thickness should never be reused.
Rotors are usually replaced in pairs so both sides of the axle brake the same way. Pads, hardware and any tone ring should be matched to the new ring at the same time. Because this part is made for the left side only, confirm which side the old ring came from before ordering, and treat the right ring as a separate purchase.
- Replace rotors in pairs for even braking
- Inspect the hub face and mounting holes for corrosion
- Bed in new pads after the rotor is installed
- Clean the hub face before fitting to reduce runout
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910922 |
| UPC | 844165012191 |
| Axle side | Left |
| Outside diameter | 13.000 in |
| Nominal thickness | 0.81 in |
| Mounting bolt hole quantity | 12 |
| Mounting bolt hole circle diameter | 8.5 in |
| Construction | Two piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface finish | Slotted, drilled and zinc plated |
| Material | Cast iron |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | CN |
Vehicle fitment
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit this ring to the left hub only, with the directional surface turning in the wheel’s forward direction. Keep it separate from the right ring, since the two are made for opposite sides of the vehicle and are not interchangeable.
What’s included
One left-side rotor ring, sold as Each.
Not included: Calipers, brake pads and other hardware are separate parts.













