Overview
The Alloy USA 15144 is a Ford 9.75 rear axle shaft for the passenger side, with 34 splines and a 5 on 135mm bolt pattern. It fits 1997-2003 Ford F-150 models, including the F-150 Heritage and Lightning.
Shafts are made from 1541H or 4140 steel depending on the application, and each one is heat treated and induction hardened. The 34 splines must agree with the gear set inside the 9.75 inch rear axle. The shaft is a passenger side unit with a 5 on 135mm bolt pattern that should match the wheels on the truck.
Key features
- Replacement shaft for the Ford 9.75 rear axle
- 34 spline
- 5 on 135mm bolt pattern
- Passenger side
- Fits the Ford F-150 and Expedition.
- Bearings, seals and studs are not included
- Axle: Ford 9.75 inch rear
- Axle shaft location: Passenger side (rear right)
- Manufacturer part number: ALY15144
- Application stated: 97-99 Ford F-150, Expedition
Spline count and wheel bolt pattern
A 9.75 inch Ford rear axle relies on the shaft’s splines to match the gear set, so spline count should be checked before the wheel and bearing work begins. The 5 on 135mm bolt pattern is a separate fit point: it should match the wheels, and the hub studs and lug nuts need to be in good condition. Worn studs are a common cause of wheel vibration.
F-150 owners often replace shafts when trail use or towing puts extra load on the drivetrain. A heavier-duty shaft can help with that use, but the carrier, bearings and wheel hardware still carry the load. Inspect the axle housing seal and the brake components at the same time, since they are reached during the same work.
- Match the shaft’s spline count to the carrier
- Check the hub studs for thread damage
- Confirm the bolt pattern matches the wheels
- Reuse bearings only after inspection
Specifications
The 15144 is a replacement axle shaft for the Ford 9.75 inch rear axle, with 34 splines. Every figure in the table below is the manufacturer value for the 15144.
| Brand | Alloy USA |
|---|---|
| Part number | 15144 |
| Part type | Replacement axle shaft |
| Axle | Ford 9.75 inch rear |
| Axle shaft location | Passenger side (rear right) |
| Spline | 34 spline |
| Bolt pattern | 5 on 135mm |
| Manufacturer part number | ALY15144 |
| Application stated | 97-99 Ford F-150, Expedition |
Vehicle fitment
The manufacturer fitment list for the 15144 names: 1997–1998, 2001–2003 Ford F-150; 2004 Ford F-150 Heritage; 1999–2003 Ford F-150 Lightning.
It is for 97-99 Ford F-150 and Expedition applications.
Check the old shaft’s spline count and length against the 15144 specifications before you start the job.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bearings, seals and studs are not part of the 15144; they have to be reused or sourced separately. The 5 on 135mm bolt pattern should match the wheels on the truck.
What’s included
One axle shaft.
Not included: Bearings, Seals, Studs.







