Overview
The AIRAID Synthaflow QuickFit Air Intake System, part number EVE400-122, is a stock upgrade intake for the 2000–2003 Ford Excursion and the 1999–2003 Ford F-250 and F-350 Super Duty. It reuses the factory inlet tube and uses an oil-type filter in an open filter housing.
The kit is classified as a stock upgrade, meaning it is positioned as a replacement for the factory intake. AIRAID states its inlet track and filter combination is less restrictive than the original setup.
Key features
- Stock upgrade intake type
- Reuses the factory inlet tube
- Open filter housing
- Oil-type filter
- The inlet track and filter combination is designed to flow more freely than the original setup.
Reusing the factory inlet tube
Because this kit reuses the factory inlet tube, that tube becomes part of the intake’s performance and sealing. Rubber and plastic parts age on engines that see heat cycles, dust and road salt, so the tube is worth a close look before the filter housing goes on. Check for cracks, soft or hardened rubber, and bends that narrow the passage.
Clamps and seals at both ends matter as much as the tube itself. A small leak after the filter can let unfiltered air reach the engine, so tighten or replace worn clamps and reseat the connections. Heavy towing and frequent hauling put extra stress on the whole intake path, so recheck the setup after long loads.
- Look for cracks and soft spots in the tube
- Replace worn or stripped clamps
- Recheck connections after heavy towing
Specifications
| Brand | AIRAID |
|---|---|
| Part number | EVE400-122 |
| Intake system type | Stock upgrade |
| Filter type | Oil |
| Filter housing type | Open |
| Inlet tube | Reuse factory |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2000–2003 Ford Excursion in the Eddie Bauer, Limited and XLT trims, the 1999–2003 Ford F-250 Super Duty in the Lariat, XL and XLT trims, and the 1999–2003 Ford F-350 Super Duty in the King Ranch, Lariat, XL and XLT trims.
Other Excursion years, Super Duty model years after 2003 and other Ford F-series models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The factory inlet tube is reused, so the kit does not supply a replacement. Check the factory tube’s condition before fitting the filter housing.
What’s included
The kit includes the air intake components described above, with the factory inlet tube reused in place.
Not included: A replacement inlet tube, since the factory tube is reused.









