Overview
The AIRAID 510-163 is a Synthaflow Cold Air Dam intake system for the 2000–2004 Toyota Tundra and the 2001–2004 Toyota Sequoia. It is a cold air kit and a direct fit.
The kit uses an oil-type filter in a steel housing with a black finish, along with a polyethylene intake tube in a natural finish. AIRAID gives the filter housing as full enclosure in one place and open in another.
Key features
- Oil-type filter
- Steel housing with black finish
- Polyethylene intake tube in natural finish
- Inlet tube included
- Cold air intake type
Oil filter care
An oil filter traps dust with a light film of oil on its media, so the oil level on the element has to stay controlled. Too little oil lets dirt pass through, while too much can drip into the intake tube. Both conditions affect how cleanly air reaches the engine, so check the filter at each routine service.
Trucks with an oil filter and an inlet tube should be kept clean around the tube and housing. Wipe away any residue before reinstalling the element, and let the filter settle after oiling so excess oil does not run into the tube. Replace the element when the media looks dark, torn or hard to clean.
- Look for dark, dirty media
- Wipe away oil drips inside the tube
- Let the filter settle after oiling
Specifications
| Brand | AIRAID |
|---|---|
| Part number | 510-163 |
| UPC | 642046511630 |
| Filter type | Oil |
| Filter housing material | Steel |
| Filter housing finish | Black |
| Filter housing type | Full enclosure or open; confirm before installing |
| Intake tube material | Polyethylene |
| Intake tube finish | Natural |
| Inlet tube | Included |
| Intake type | Cold air |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2000–2004 Toyota Tundra and the 2001–2004 Toyota Sequoia in the Limited and SR5 trims.
Other Toyota trucks, and Tundra or Sequoia model years outside these ranges, are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit includes an inlet tube.









