Overview
The AIRAID Synthaflow cold air dam air intake system, part number 400-131-1, is a cold air intake kit with an oil-type filter and a full enclosure filter housing. Its inlet track and filter combination is designed to restrict airflow less than the original configuration. The factory inlet tube is reused.
The filter housing is black polyethylene and is designed as a direct fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Cold air dam design for a cold air intake
- Oil filter type in a black polyethylene housing
- Full enclosure filter housing; confirm the enclosure type before mounting
- Reuses the factory inlet tube
- Inlet track and filter combination that AIRAID describes as less restrictive than the original configuration
- Designed as a direct fit
Reusing the factory inlet tube
Keeping the factory inlet tube means the new filter housing has to connect to an existing part that has already seen years of heat and vibration. Start by inspecting the tube for cracks, stiffness, or soft spots, especially near the bends and clamp points. A tube that has hardened can split under load, so replace it if it no longer flexes or seals cleanly.
A full enclosure housing changes how the tube meets the air box, so confirm the connection points before tightening any clamps. Heat from the exhaust and engine bay ages rubber and plastic, which makes periodic checks worthwhile after each season. Check for oil or dirt inside the tube, since debris there can pass into the engine.
- Check the factory tube for hardening near clamps
- Confirm the tube connection before final tightening
- Inspect the tube interior for oil or debris
Specifications
| Brand | AIRAID |
|---|---|
| Part number | 400-131-1 |
| UPC | 642046401313 |
| Intake type | Cold air |
| Filter housing type | Full enclosure (specifications); partial enclosure (description summary) |
| Filter type | Oil |
| Inlet tube | Reuse factory |
| Filter housing material | Polyethylene |
| Filter housing finish | Black |
Vehicle fitment
It is designed as a direct fit. Check your engine and confirm your vehicle’s year, model and trim before ordering.
Because no year or model is given, it is not possible to say which generations are excluded.
What’s included
The kit is the intake system itself. The factory inlet tube is reused rather than supplied.












