Overview
The AIRAID MXP Series Synthamax Cold Air Dam Air Intake System, part number 521-284, is a cold air intake kit with a dry filter in a steel housing with a black finish. The inlet track and filter combination is substantially less restrictive than the OE configuration. The kit reuses the factory inlet tube.
The AIRAID 521-284 can be located by UPC 642046542849 or by the Synthamax Cold Air Dam name. The filter is Airaid’s dry SynthaMax type, and the housing is steel with a black finish.
Key features
- Dry SynthaMax filter element
- Steel filter housing with black finish
- Cold air intake design
- Reuses the factory inlet tube, so no replacement tube is listed
- Inlet track and filter combination that Airaid describes as substantially less restrictive than OE
Reusing the factory tube
Keeping the factory inlet tube means the intake connects to the stock path without a new tube to seal or fit. Check the old tube for cracks, soft spots and loose clamps before installing the new housing, since a worn tube can leak unfiltered air past the filter. Replace any damaged clamp or coupling so the connection stays tight.
A steel housing holds its shape well, but it can still rub on hood latches, wiring or brackets. Look for scuffs on the black finish after the first drives and adjust the position if the housing shifts. Dry filters should be inspected at regular intervals and replaced when worn, particularly in dusty areas where the media loads quickly.
- Inspect the factory tube for cracks before fitting
- Tighten clamps after the first few trips
- Check the housing for rubbing against the hood latch
- Keep the stock tube in place on the vehicle
Specifications
| Brand | AIRAID |
|---|---|
| Part number | 521-284 |
| UPC | 642046542849 |
| Intake type | Cold air |
| Filter type | Dry (SynthaMax) |
| Filter housing material | Steel |
| Filter housing finish | Black |
| Inlet tube | Reuses factory tube |
Vehicle fitment
Compare your year, make, model and engine against the kit before buying.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit includes the dry filter and steel housing, and it reuses the factory inlet tube.
Not included: a replacement inlet tube, since the kit reuses the factory tube.









