Select your vehicle
-13%

AIRAID Cool Air Dam Air Intake System – 310-176

AIRAID

Shop Jeep Wrangler YJ Air Intake Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 1991–1995 Jeep Wrangler (YJ) in covered trims
  • Cold air intake with an oil-type filter in an open housing
  • Inlet tube included
  • Part number EVE310-176

Description

Overview

The AIRAID Cool Air Dam Air Intake System, part number EVE310-176, is a cold air intake kit for the 1991–1995 Jeep Wrangler (YJ). The kit includes the inlet tube and uses an oil-type filter in an open filter housing.

AIRAID says its intakes unleash hidden horsepower, and that the inlet track and filter combination is substantially less restrictive than the factory setup. The open housing leaves the filter exposed rather than enclosed.

Key features

  • Cold air intake system
  • Inlet tube included
  • Oil-type filter
  • Open filter housing
  • Inlet track and filter combination that AIRAID describes as less restrictive than the OE configuration

Oil filter care after installation

An oiled filter traps dust well only when it stays lightly coated with the correct filter oil. After cleaning, let the element dry fully, then apply a thin, even coat before reinstalling. Too much oil can drip into the intake tube and reach the engine, so wipe away any excess.

Because this housing is open, the filter is exposed to water, mud and debris more than an enclosed setup. After stream crossings or heavy rain, inspect the element and the tube connections for moisture. Replace the filter when it is torn, badly stained or has lost its shape, since those signs point to reduced protection.

  • Clean and re-oil the filter at each service interval
  • Let the element dry fully before reinstalling
  • Check the tube for cracks or loose clamps
  • Wipe away excess oil before the filter goes back in

Specifications

Brand AIRAID
Part number EVE310-176
Intake system type Cold air
Filter type Oil
Filter housing type Open
Inlet tube Included
Fitment type Direct fit

Vehicle fitment

It fits the 1991–1995 Jeep Wrangler (YJ) in the Base, Islander, Rio Grande, S, SE and Sahara trims.

Other Wrangler generations, including the TJ, LJ and JK, are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

The inlet tube is included. Check the rest of the kit contents against your installation before starting.

Fitment

VehicleYearsTrims
Jeep Wrangler (YJ)1991–1995Base, Islander, Rio Grande, S, SE, Sahara

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the AIRAID EVE310-176 fit a 1991–1995 Jeep Wrangler?

Yes. It fits the 1991–1995 Jeep Wrangler (YJ) in the Base, Islander, Rio Grande, S, SE and Sahara trims. Other Wrangler generations are not covered. Confirm fit for your vehicle's year, model and trim before ordering.

Does this AIRAID intake include an inlet tube?

Yes. The inlet tube is shown as included, so the kit supplies its own tube rather than reusing the factory part. The filter is an oil type in an open filter housing.

What type of filter does the EVE310-176 use?

It uses an oil-type filter in an open housing. Oiled filters need periodic cleaning and re-oiling to keep filtering effectively, so plan that routine service after the intake is installed.

What should I do if the intake gets wet on the trail?

Oiled filters can pick up water and debris when they are exposed, so inspect the element after crossing streams or mud. Let the filter dry fully, then clean and re-oil it before returning to service. Check the tube connections for water entry as well.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler YJ Air Intake Kits on Amazon