Overview
The Crown Automotive D35YOKEUBK is a U-bolt type pinion yoke kit for the Dana 35 rear axle. The yoke is clamped to the pinion with U-bolts. It is for the Dana 35 rear axle only and fits Jeep Cherokee, Comanche, Grand Cherokee, Grand Wagoneer, Wagoneer and Wrangler models from 1984 to 2012.
The kit includes the yoke, flange nut, two U-bolts with washers and nuts, and an oil seal. The list is long, so match the model year and the Dana 35 axle before ordering.
Key features
- U-bolt type pinion yoke
- Includes flange nut, two U-bolts with washers and nuts, and oil seal
- Made for the Dana 35 rear axle only
- Covers Cherokee XJ, Comanche, Grand Cherokee ZJ, WJ and WK, Wagoneer SJ, and Wrangler YJ, TJ, LJ and JK
Pinion yoke and seal care
The pinion yoke connects the driveshaft to the axle pinion gear, and the U-bolts hold it on the pinion splines. Because the clamp carries the torque load, U-bolt yokes should be checked for loose or stretched U-bolts after the first trail runs, with the nuts re-torqued to the value for your axle. A yoke that moves on the pinion can wear the splines and cause vibration that gets worse over time.
The oil seal rides on the yoke’s sealing surface, so inspect that surface for grooves or pitting when the yoke is removed. A new seal is a common addition during a yoke replacement, and a worn surface will leak even with a new seal. Check the pinion bearing preload as well, since it affects how the yoke seats. Keep the axle breather clear, because pressure buildup can push lubricant past a new seal.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | D35YOKEUBK |
| UPC | 848399050783 |
| Axle | Dana 35 rear only |
| Yoke design | U-bolt type |
| Included | Yoke, flange nut, 2 U-bolts with washers and nuts, oil seal |
Vehicle fitment
This kit fits the following vehicles:
- 1984–2001 Jeep Cherokee (XJ)
- 1986–1992 Jeep Comanche
- 1993–1998 Jeep Grand Cherokee (ZJ)
- 1999–2005 Jeep Grand Cherokee (WJ)
- 2006–2012 Jeep Grand Cherokee (WK)
- 1984–1991 and 1993 Jeep Grand Wagoneer (SJ)
- 1984–1990 Jeep Wagoneer (SJ)
- 1988–1995 Jeep Wrangler (YJ)
- 1997–2006 Jeep Wrangler (TJ)
- 2004–2006 Jeep Wrangler Unlimited (LJ)
- 2007–2012 Jeep Wrangler (JK)
The 2018 and later Wrangler (JL) and the Dana 30 and Dana 44 axle applications are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the U-bolts, washers and nuts that come in the kit with the yoke, rather than mixing them with the old hardware.
What’s included
One U-bolt type pinion yoke, one flange nut, two U-bolts with washers and nuts, and one oil seal.









