Overview
The Gorilla Automotive 91138HT is a heat treated acorn bulge lug nut with a 12mm x 1.50 thread and a 13/16 inch hex.
The nut is heat treated. Confirm your vehicle’s year, model and trim before ordering, and confirm the thread size and seat type against your wheel.
Key features
- Heat treated construction
- Acorn bulge seat style
- 12mm x 1.50 thread size
- 13/16 inch hex
Heat treated fasteners in service
Heat treatment changes the hardness of steel so a fastener resists stretching and deformation under repeated tightening. Heat treated nuts are commonly chosen for wheels that come off often, such as trail or track use, where repeated removal can wear softer nuts faster. Hardness alone does not replace correct thread and seat matching.
Inspect heat treated nuts for surface cracks, rounded hex corners and thread galling after each wheel change. Clean the threads and seats before reinstalling, and use a torque setting that suits your vehicle. Stud threads and wheel seats also wear, so checking them at the same time keeps the whole assembly reliable.
- Check for cracks after heavy use
- Clean threads before reinstalling
- Inspect wheel seats along with the nuts
- Replace nuts that show deformation
Specifications
| Brand | Gorilla Automotive |
|---|---|
| Part number | 91138HT |
| UPC | 12619303755 |
| Thread size | 12mm x 1.50 |
| Hex size | 13/16 inch |
| Seat style | Acorn bulge |
| Treatment | Heat treated |
Vehicle fitment
Confirm the thread size and seat type against your wheel before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Before installing, check that the 12mm x 1.50 thread and acorn seat match your wheel studs.
What’s included
This item is one heat treated acorn bulge lug nut; check the pack contents before installing.









