Overview
The Gorilla Automotive K8TS-14200BGR is a 32-piece duplex spline lug nut kit in black with a 14mm x 2.0 size. The lug nuts have a spline style, and the kit contains 32 pieces.
Gorilla Automotive has been in the accessory business for over 40 years, with a focus on quality.
Thread pitch, seat style, hex size and material should be matched to your wheels and studs before ordering.
Key features
- 32-piece lug nut kit
- Duplex spline style
- Black color
- 14mm x 2.0 size
- Count of 32 pieces
Checking wheel and stud match
Duplex spline lug nuts hold the wheel with a two-part profile that a matching key grips, which makes them harder to remove by hand than standard hex nuts. Check each nut’s seat against the wheel before mounting, since a mismatched seat can loosen over time even when the thread matches. Use the same nut type on every stud so the wheel clamps evenly.
Torque is best set with a torque wrench in a star pattern, and recheck after the first miles of driving. Impact tools can overtighten spline nuts and round the drive surface, so hand-tighten or use a calibrated wrench. Clean the threads of dirt and rust before fitting, and inspect the splines regularly for rounding or cracks. Keep the spline key in a labeled place with the jack and tools.
Specifications
| Brand | Gorilla Automotive |
|---|---|
| Part number | K8TS-14200BGR |
| Catalog part number | GORK8TS-14200BGR |
| Product type | Lug nut kit |
| Style | Spline (duplex spline) |
| Color | Black |
| Size | 14mm x 2.0 |
| Count | 32 |
Vehicle fitment
No vehicle is named for this kit, and no model years or chassis codes apply to it.
Compare the 14mm x 2.0 size and spline style with your wheel and stud requirements before installing.
Vehicle compatibility depends on your wheel seat style and stud size. Check both against your vehicle’s year, model and trim before ordering.
Installation notes
The kit contains 32 black duplex spline lug nuts.
Re-torque the lug nuts after the first miles of driving. Check tire, fender and suspension clearance at full steering lock and full suspension travel before heading off-road.
Spline lug nuts need a matching spline drive key or socket, so have one on hand before installing.
Before installing, compare the part number on the package with K8TS-14200BGR and check that all parts are present. Work on level ground and wear eye protection.
Check that each lug nut seat matches the wheel seat, because a mismatched seat can loosen over time.
What’s included
The kit is 32 pieces of black duplex spline lug nuts.
Not included: A spline drive key, wheel locks and studs are not part of this kit.









