Overview
The King Shocks PR2512-SS is a 2.5-inch smooth body remote reservoir shock absorber with a 32.65 in extended length and 15.00 in of travel. It is designed for use with existing coil springs, torsion bars or leaf springs, so it works as the damper in a suspension your vehicle already has.
The smooth body uses the same materials and tolerances as King’s Pure Race Series shocks, and the shock is fully serviceable and adjustable. Vehicle fit depends on your own application, so check it against your setup before ordering.
Key features
- Precision bored shock cylinders, held to within +/- .001 for proper sealing and valving
- Heat treated 6061 aluminum alloy piston
- Heat treated stainless alloy valve shims
- Replaceable steel, Teflon lined spherical bearing
- Wear bands made from Rulon composite for wear resistance
- Fully serviceable and adjustable design
- Built for use with existing coil springs, torsion bars or leaf springs
Setting up with your spring
A remote reservoir shock is only part of the suspension, so its results depend on the spring it pairs with. Coil, torsion bar and leaf setups each load the damper differently, and the right valving depends on spring rate and corner weight. Set the shock up with the spring you plan to run rather than adjusting it on the bench and bolting it in later.
Because this shock is fully serviceable, record every valving or setting change before pulling it apart, so you can return to a known baseline. Clean the shaft and the reservoir port before reinstalling, and check the Rulon wear bands and spherical bearing for play during service. Shocks used on the trail benefit from routine inspection, because grit and impacts add wear faster than road driving.
Specifications
| Brand | King Shocks |
|---|---|
| Part number | PR2512-SS |
| UPC | 70000640856 |
| Body style | Smooth body |
| Reservoir | Remote reservoir |
| Shock size | 2.5 in |
| Extended length | 32.65 in |
| Collapsed length | 20.65 in |
| Travel | 15.00 in |
| Piston | Heat treated 6061 aluminum alloy |
| Valve shims | Heat treated stainless alloy |
| Spherical bearing | Replaceable steel, Teflon lined |
| Wear bands | Rulon composite |
Vehicle fitment
No vehicles are confirmed for this part number. It is designed for use with existing coil springs, torsion bars or leaf springs, so it works as the damper in a suspension you already have.
Confirm your vehicle’s year, model and trim before ordering, and check the spring and mounting compatibility with your setup before fitting.
Installation notes
Setup depends on the spring it pairs with. The shock is adjustable, so record any valving or setting changes before reinstalling it.
What’s included
Check the contents against your setup before ordering, including mounting hardware and spring hardware.









