Overview
The Bilstein 24-062107 is a front 5100 Series monotube gas shock designed for lifted trucks, Jeeps and prerunners. Its manufacturer fitment list covers 1988 to 1999 Chevrolet and GMC C1500 pickups and Suburbans, 1992 to 1994 Blazer, and 1995 to 1999 Tahoe and Yukon models. The shock is built for large diameter tires and specific manufacturer lift kits that keep the stock OEM mounting.
Key features
- Monotube gas pressure construction with self-adjusting deflecting disc valving
- High-flow piston to reduce harshness
- Independent rebound and compression tuning
- Larger working piston area for damping control
- Designed for 3 to 6 in. lift with a non-coilover 46mm ID smooth body
Lift kits and shock travel
Shock travel matters as much as damping when a truck has been lifted. Once the suspension height changes, the shock’s compressed and extended lengths decide how far the damper can move before it bottoms out or runs out of extension. Measure the installed length of the shock you are removing and compare it with the new unit at the lifted ride height, since a shock that is too short or too long can strain its mounts and limit articulation.
Large diameter tires add weight and rotational load, so a shock built for lifted use helps control the extra mass. Front shocks are often replaced alongside steering components and sway bar links after a lift, because worn parts change how the axle moves under damping. Check bushings and mounts for cracking, and tighten fasteners after the first few drives.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-062107 |
| UPC | 651860638386 |
| Shock series | 5100 Series |
| Collapsed length | 10.04 in. |
| Extended length | 15.43 in. |
| Travel length | 5.39 in. |
| Lower mount | Bar pin |
| Upper mount | Stem |
| Shaft diameter | 11mm |
| Body design | 46mm ID smooth body, non-coilover |
| Internal design | Mono tube |
| Finish | Zinc plated |
| Reservoir | No |
| Position | Front |
| Lift height | 3 to 6 in. lift |
| Boot included | No |
Vehicle fitment
The manufacturer fitment list covers 1988 to 1999 Chevrolet and GMC C1500 models and Suburbans, 1992 to 1994 Chevrolet Blazer, and 1995 to 1999 Chevrolet Tahoe and GMC Yukon.
Models from 2000 onward and 2500 and 3500 trucks are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this shock is designed for manufacturer lift kits, confirm your lift falls within the 3 to 6 in. range before installing. Check that the stock OEM mounting matches the bar pin lower and stem upper mounts.
What’s included
Not included: The boot is not included with this shock.









