Select your vehicle

Bilstein 5100 Series Shock Absorber – 33-151632

Bilstein

$100.24In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 8:00 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 1999-2004 Jeep Grand Cherokee (WJ) in Laredo, Limited, Overland, Special Edition and Sport trims
  • Bilstein 5100 Series rear shock, part number 33-151632
  • Eye mounts: 12.2 mm lower, 12.1 mm upper; 14 mm shaft
  • Gas-charged monotube design with no reservoir and zinc plated finish
  • Designed for a 3 – 4 in. lift

Description

Overview

The Bilstein 5100 Series shock absorber, part number 33-151632, is a rear gas-charged monotube shock for the 1999-2004 Jeep Grand Cherokee (WJ). It fits the WJ in Laredo, Limited, Overland, Special Edition and Sport trims, and it suits lifted trucks, Jeeps and prerunners.

Bilstein presents the 5100 Series as its traditional single-tube design, built around gas pressure to hold damping steady over long use. The shock uses eye mounts at both ends and is designed for manufacturer lift kits that keep the stock mounting configuration. Its listed lift range is 3 – 4 in.

Key features

  • Monotube gas pressure construction
  • Self-adjusting deflecting disc valving
  • High-flow piston that Bilstein says reduces harshness
  • Independent rebound and compression tuning
  • Larger working piston area for damping control
  • Built to control large diameter tires
  • Designed for lift kits that use the stock OEM mounting configuration

Checking the WJ setup

The WJ rear suspension moves a lot over rough trails, so the shock’s eye bushings take steady load. Measuring each eye before installation shows whether the existing bushing is a fit. Small differences in eye size can make a shock feel loose or cause it to bind, so compare carefully.

Lift height and mounting detail should be checked together. A shock suited to a moderate lift may run out of travel on a taller setup. Inspect the rear bump stops and brackets as well, since they absorb load when the axle reaches the end of its travel.

  • Measure the eye bushings on both ends
  • Compare shaft diameter with the bushing bore
  • Check lift height before final tightening
  • Inspect bump stops for cracks or compression

Specifications

Brand Bilstein
Part number 33-151632
UPC 651860604640
Series 5100 Series
Position Rear
Collapsed length 15.91 in.
Extended length 25.93 in.
Travel length 10.02 in.
Lower mount Eye, 12.2 mm
Upper mount Eye, 12.1 mm
Shaft diameter 14 mm
Body design 46 mm ID smooth body
Internal design Monotube
Reservoir No
Gas charged Yes
Finish Zinc plated
Fitment type Direct fit
Lift height With 3 – 4 in. lift

Vehicle fitment

It fits the 1999-2004 Jeep Grand Cherokee (WJ) in the Laredo, Limited, Overland, Special Edition and Sport trims.

The list names only the WJ generation, so the 1993-1998 Grand Cherokee (ZJ) and other Jeep models are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Compare the 12.2 mm lower and 12.1 mm upper eye sizes with your existing mounts before fitting the shock, and check that your lift falls within the listed 3 – 4 in. range.

What’s included

Check the package contents, including any boot and mounting hardware, against your installation before starting.

SKU: BIL33-151632 Category:

Specification

Shipping weight 4.63 lbs
Package dimensions 26.80 × 3.00 × 3.00 in
brands

Fitment

VehicleYearsTrims
Jeep Grand Cherokee (WJ)1999–2004Laredo, Limited, Overland, Special Edition, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Bilstein 33-151632 fit a 1999-2004 Jeep Grand Cherokee WJ?

Yes. Bilstein lists part 33-151632 for the 1999-2004 Jeep Grand Cherokee (WJ) in Laredo, Limited, Overland, Special Edition and Sport trims. The list names no other Grand Cherokee generations, so confirm your year and trim first.

What lift height is this shock designed for?

It is designed for a 3 - 4 in. lift. Its lower eye is 12.2 mm and its upper eye is 12.1 mm, so compare both with your existing mounts before installing.

Does the shock include a boot or mounting hardware?

Confirm the package contents before installing. The shock has a 14 mm shaft, a 46 mm ID smooth body and no reservoir.

Can eye mounts be adapted to a different size?

Only with bushings or sleeves made for the eye diameter. Measure the eye and the shock mount before buying adapters. Forcing a mismatched fit can stress the bushing and shorten its life.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon