Overview
The King Shocks 25001-223A is a Wide Range Compression Adjuster front shock kit for the 2007–2017 Jeep Wrangler JK, sold as a pair. It is the adjustable version of the 25001-223 kit and fits both 2-door and 4-door Wranglers.
The compression adjuster is a billet knob with 20 positive clicks, so each change is a fixed step. The kit is a custom tuned OEM performance setup, with a damping curve and spring rate developed through real-world testing for Jeep use. It fits both stock height and lifted aftermarket suspensions.
Key features
- Adjustable front shocks with a billet compression knob
- 20 positive clicks of compression adjustment
- Large diameter micro-polished shafts
- Remote reservoirs with Aeroquip high pressure hoses
- 6063 aluminum alloy reservoirs that dissipate heat quickly
- Simple bolt-on installation
Setting compression for your driving
A compression setting controls how firmly the shock resists quick inputs, such as hitting a pothole or dropping off a ledge. A firmer setting can keep the front end steadier at speed, while a softer one can help the tires follow uneven ground. Many owners start near the middle of the range, drive the truck, and then adjust a few clicks at a time.
Make changes on level ground and write down each click position so you can return to a known setting. Heat builds up during long runs, so retest after a warm drive. Front shock service often includes checking the bushings and mounts, since loose parts can make a setting feel different than intended.
- Note the click position before each change
- Retest after a warm drive
- Check mounts when the feel changes
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-223A |
| UPC | 700005378400 |
| Shock series | Performance Series |
| Position | Front |
| Adjustment | Compression, billet knob, 20 positive clicks |
| Reservoir | Remote, 6063 aluminum alloy |
| Hose | Aeroquip high pressure |
| Shaft | Large diameter, micro-polished |
| Lift height | w/ adjusters (no lift range stated) |
| Sold as | Pair |
Vehicle fitment
It fits the 2007–2017 Jeep Wrangler JK, including Rubicon, Sahara, Sport, Sport S, X and the 70th and 75th Anniversary editions, in standard and Unlimited bodies.
Newer Wranglers from 2018 onward and earlier TJ and LJ generations are not in the listed range. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is a bolt-on swap for front shocks. Set the compression before installation if you prefer a starting point, then fine tune it with the billet knob after the truck is on the ground. Work on level ground with the vehicle secured before removing the factory shock.
What’s included
A pair of adjustable front shock kits with billet compression knobs, remote reservoirs and Aeroquip high pressure hoses.











