Overview
The ARB OMEFJC10HKBP51 is a BP-51 internal bypass shock absorber sold by ARB 4×4 Accessories. It fits the 2010–2014 Toyota FJ Cruiser (Base) and is a direct fit, gas charged unit.
The BP-51 range was developed through a detailed process aimed at balancing comfort and control. Old Man Emu’s ride engineers designed and tested these shocks in-house. They are vehicle specific and use the vehicle’s existing mounting locations.
The adjustable design lets owners set rebound and compression on the vehicle, which ARB describes as class leading ride customisation for different vehicles or trips. The bypass valving adds position-dependent damping near each end of the stroke.
The remote oil canister, spring seat, adjuster and top hat are 6061 grade aluminum, and the 51mm bore body has a type III hard anodized finish. A dash -6 high temperature Teflon hose connects the remote canister, and large Teflon-lined spherical bearings are fitted. Oversized rubber bushings are used, and the piston shaft is hard chromed and ground with an impact resistant high density polyethylene shaft guard. Part number OMEFJC10HKBP51 and UPC 9332018039668 identify the unit, which fits the FJ Cruiser (Base) only.
Key features
- Internal bypass damping
- Independent rebound and compression adjustment
- 6061 grade aluminum remote oil canister
- Large, Teflon-lined spherical bearings
- Dash -6 high temperature Teflon hose
- Impact-resistant, high density polyethylene shaft guard
- Hard chromed, ground piston shaft
- 51mm bore body with a type III hard anodized finish
Bypass shocks and off-road use
A bypass shock routes oil through a separate passage during part of its stroke, which helps it keep damping consistent when it gets hot on long climbs or descents. Off-road, that consistency matters because the shock is worked hard over repeated bumps. The remote canister adds oil capacity and gives the shock room to shed heat, but it also adds hoses and mounts that need regular checks.
Before a trail trip, inspect the hose routing, canister mount and eye bushings. Keep the hose clear of sharp edges and moving parts. Bypass shocks are often fitted with spring or lift changes, so make sure the shock length and mounting points still suit the vehicle after those changes.
- Check hose routing and clearance
- Inspect the canister mount and clamps
- Confirm shock length after any spring or lift change
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | OMEFJC10HKBP51 |
| UPC | 9332018039668 |
| Bore | 51mm |
| Shock type | Gas charged |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2010–2014 Toyota FJ Cruiser (Base). Other FJ Cruiser years and other Toyota models fall outside this fit.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.








