Overview
This Pro Comp Suspension part is sized at 1/2 inch inside diameter, 5/8 inch outside diameter and 1.48 in long. Confirm what it is and where it installs before ordering.
Measure the piece you are replacing and confirm the part type before buying, since size alone does not identify the application.
Key features
- 1/2 inch inside diameter
- 5/8 inch outside diameter
- 1.48 in dimension
Measuring before you buy
Parts sold by size alone are often small bushings, sleeves or spacers that sit inside a joint, mount or bracket. Before buying one, remove the old piece and measure its inside diameter, outside diameter and length. Matching all three dimensions is the starting point, but it does not confirm the part belongs in your application, so the location it came from matters just as much.
Look closely at the old piece for cracks, flattened edges, heat marks or uneven wear. A loose fit or play in the joint can point to a worn mating surface, and a new part will not fix that. Clean the bore and pin before installing the replacement so it seats square and turns freely.
- Measure the old part at more than one point
- Check the mating bore and pin for wear
- Note the orientation of the old piece before removing it
- Compare the length with the space it occupies
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| UPC | 614901155433 |
| Inside diameter | 1/2 inch |
| Outside diameter | 5/8 inch |
| Length | 1.48 in |
Vehicle fitment
Before ordering, check the part against your vehicle’s year, model and trim, and measure the piece it would replace.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One part sized as 1/2 inch inside diameter, 5/8 inch outside diameter and 1.48 in long. No hardware is included.









