325/60R20 is 35.4 inches tall and 12.8 wide. The tire size formula, a chart of 24 off-road sizes in inches, speedometer error and regearing…
Tires & Wheels
Showing 1645–1656 of 2982 resultsSorted by popularity
-
Tires
Maxxis LT245/70R17, Bighorn MT-762 Tire – TL00327100
- Maxxis LT245/70R17 Bighorn MT-762 radial mud terrain tire, part number MXXTL00327100
- Extra large shoulder lugs protect rim and sidewalls
- Built for a 17 inch rim diameter and 245 section width
- Pinned for studs with staggered shoulder lugs
- Universal Fit label, no vehicle matched
SKU: MXXTL00327100 -
Tires
Maxxis LT235/75R15 Tire, Bighorn – TL16009000
- Maxxis Bighorn LT235/75R15 mud terrain tire, part number MXXTL16009000
- Sized for 15-inch rims; section width 265, tire width 9, tire height 35
- Staggered shoulder lugs and deep tread blocks for mud and uneven ground
- Shoulder blocks pinned for studs; M&S All-Season rating
- Fitment field reads Universal Fit; no specific vehicle named
SKU: MXXTL16009000 -
-
Tires
Maxxis 42x14.50-17LT Tire, Competition Trepador M8060 – TL00007700
- Maxxis Trepador Competition 42×14.50-17 mud terrain tire, part number MXXTL00007700
- Rim diameter 17 inches, tread width 14.5
- Overall height over 40
- Competition bias ply with nylon belt reinforcement
- No manufacturer warranty for competition use
SKU: MXXTL00007700 -
Tires
Maxxis 40X13.50-17LT, Trepador – TL00007800
- Maxxis Trepador 40×13.50-17LT mud terrain tire, part number MXXTL00007800
- Bias ply casing with nylon belt reinforcement for puncture resistance
- Built for a 17 inch rim diameter and 13.5 tire width
- Not matched to one make, model or year; Universal Fit
- DOT approved
SKU: MXXTL00007800 -
Tires
Maxxis 40x13.50-17LT Tire, Competition Trepador M8060 – TL00007900
- Maxxis Trepador Competition 40×13.50R17LT mud terrain tire, part number MXXTL00007900
- Rim diameter 17 inches, tire height 40, tread width 13.5
- Extreme off-road bias ply with nylon belt
- Universal Fit label; check rim and clearance before mounting
- Maxxis states no manufacturer warranty for competition use
SKU: MXXTL00007900 -
Tires
Maxxis 38x13.00-15LT Tire, Creepy Crawler – TL30009100
- Maxxis Creepy Crawler 38×13.00-15LT mud terrain tire, part number MXXTL30009100
- Bias ply casing with stone ejectors and large shoulder lugs
- Built for a 15 inch rim diameter
- Universal Fit label, with no specific vehicle matched
- DOT approved, M&S all-season rated
SKU: MXXTL30009100 -
Tires
Maxxis 38.5x14.50-16LT Tire, Creepy Crawler – TL30009300
- Maxxis Creepy Crawler 38.5×14.50-16LT mud terrain tire, part number MXXTL30009300
- Built for 16-inch rims, tire height 39, tread width 14.5
- Conformable bias ply casing with stone ejectors
- DOT approved and rated M&S All-Season
- Match rim and fender clearance before choosing this size
SKU: MXXTL30009300 -
Tires
Maxxis 37x14.50-16LT Tire, Creepy Crawler – TL30008700
- Maxxis Creepy Crawler mud terrain tire, part number MXXTL30008700
- Size 37×14.50-16LT with a 16 inch rim diameter
- Tire width 14.5 and tire height 37
- Conformable bias ply casing with stone ejectors
- DOT Approved and M&S All-Season rated; no vehicle is listed
SKU: MXXTL30008700 -
Tires
Maxxis 37x13.50-17LT Tire, Trepador M8060 – TL30027200
- Maxxis Trepador M8060 Competition mud terrain tire, part number MXXTL30027200
- Size 37×13.50R17 for 17-inch rims, tire height 37
- Bias ply construction with nylon belt reinforcement
- Universal Fit sizing; match rim and clearance before choosing
- Maxxis gives no manufacturer warranty for competition use
SKU: MXXTL30027200 -
Start with the tire
Tire choice drives everything else, so settle it first. All-terrain tires suit trucks that spend most of their miles on pavement with regular dirt roads and light trails. Mud-terrain tires have deeper, more widely spaced lugs that clear mud and grip rock, but they are louder and wear faster on the highway. Hybrid or rugged-terrain designs sit between the two. Look at the load range and ply rating too: heavier trucks and trailer towing call for an LT-metric tire with a higher load range.
Reading tire and wheel sizes
A size such as 35x12.50R18 means a roughly 35 inch overall diameter, a 12.5 inch tread width, radial construction, and an 18 inch rim. Metric sizes like LT265/65R17 express width in millimeters and sidewall height as a percentage of that width. Convert between the two before comparing, because a tire listed in inches can be taller than it looks. Wheel listings add diameter, width, offset, backspacing, center bore, and bolt pattern, and every one of those needs to match your vehicle.
- Bolt pattern: lug count and circle diameter, such as 5 on 4.5 or 8 on 6.5. It must match the hub exactly.
- Offset and backspacing: these set how far the wheel and tire sit in or out. Too much poke can rub fenders and stress bearings.
- Center bore: the wheel bore must fit the hub, or the wheel needs hub-centric rings.
- Load rating: the wheel and tire should each carry the axle weight of your loaded vehicle.
Fit, clearance, and gearing
Larger tires change more than appearance. Taller tires lower your effective gear ratio, can throw off the speedometer, and may call for re-gearing on heavier trucks. Check clearance at full steering lock and at full suspension compression, since rubbing often appears only when the suspension is flexed. A leveling kit, lift, trimmed fender liners, or fender flares may be needed for bigger sizes. Spacers and adapters can correct a clearance or bolt pattern problem, but use quality hub-centric parts and verify stud length.
Installation and care
Have wheels mounted and balanced by a shop that can handle your tire size, and tighten lug nuts to the vehicle manufacturer's torque specification in a star pattern. Recheck torque after the first 50 miles or so. Tire pressure monitoring sensors may need to be moved or reprogrammed. Rotate tires on a regular schedule, and consider a full-size spare that matches your set. Lift, tire size, and wheel offset rules vary by state, so check local regulations.
Always confirm fitment for your exact year, make, and model against the manufacturer's specifications before choosing a size.
Mistakes to avoid
The most common error is buying on looks alone. Confirm that the wheel's load rating covers your vehicle's axle weight, because some decorative wheels are rated lighter than heavy trucks need. Do not assume a wheel that bolts on is hub-centric, and never rely on lug nuts to center a wheel with a larger bore. Check that your lug nuts match the seat type of the new wheel, since conical, ball, and flat seats are not interchangeable. Beware of mixing tire sizes or tread patterns between axles on four-wheel-drive vehicles, since differing rolling diameters strain the transfer case and differentials. Finally, mount a tire only on a wheel width within the tire maker's approved range, which is listed for each tire size.
Related guides
- 325/60R20 in Inches: Tire Size Math Made Simple
Popular Tires & Wheels brands
- FUEL Off-Road (636)
- Method Race Wheels (417)
- Pro Comp Alloy Wheels (357)
- Toyo Tires (212)
- Mickey Thompson (192)
- Gorilla Automotive (139)
- BF Goodrich Tires (125)
- Super Swamper Tires (113)
- Pro Comp Steel Wheels (82)
- Nitto (80)
- Raceline Wheels (72)
- Falken (71)
Shop Tires & Wheels by type
- Wheels (1,731)
- Tires (972)
- Tire & Wheel Accessories (261)
Tires & Wheels FAQ
What is the difference between all-terrain and mud-terrain tires?
All-terrain tires balance on-road manners with light off-road traction. Mud-terrain tires use larger, more open tread blocks that clear mud and bite on rock, but they usually run louder and wear faster on pavement. Pick based on where you spend most of your miles.
How do I find my vehicle's bolt pattern?
The bolt pattern is the lug count and the circle diameter they sit on, such as 5 on 4.5 inches. It is listed in your owner's manual and by the manufacturer. A mismatched pattern will not seat safely, so confirm it before choosing wheels.
Will bigger tires affect my speedometer?
Yes. A taller tire covers more ground per revolution, so the speedometer reads lower than your true speed. The odometer is affected too. Many owners recalibrate with a programmer or the vehicle's computer, and heavier trucks often benefit from re-gearing.
Do I need a lift to fit larger tires?
Often, yes, though it depends on the vehicle and the tire. Small increases may fit with a leveling kit or trimming, while 35 inch and larger tires usually need added suspension height. Check clearance at full steering lock and full compression.












