Entry Guards
Showing 13–24 of 25 resultsSorted by popularity
-
Entry Guards
Kentrol Entry Guards (Black) – 80585
- Fits the 2007–2016 Jeep Wrangler (JK) Unlimited, per the manufacturer fitment list
- Set of 4 guards in black textured T-304 stainless steel
- Includes all hardware needed for installation
- Installs with 3M tape
- Covered by a limited lifetime warranty
SKU: KEN80585 -
Entry Guards
Jeep Door Entry Guards (Black) – 82210106AB
- Fits the 2007–2016 Jeep Wrangler (JK) Unlimited, per the manufacturer fitment list
- Black plastic door entry guards for four-door models
- Protects interior door sills from scratches and scrapes
- Applies with 3M tape
- Part number 82210106AB
SKU: JEP82210106AB -
Entry Guards
Billet Door Sill Plates
- Drake JP-18040-AL billet door sill plates for 2-door models
- Fits 2007–2015 Jeep Wrangler JK 2-door trims including Rubicon, Sahara, Sport and X
- Black anodized aluminum with raised brushed accent bars
- Adhesive tape installation, no drilling, sold as a pair
SKU: DRKJP-18040-AL -
Entry Guards
Bestop HighRock 4X4 Black PVC Entry Guard Set (Black) – 51049-01
- Fits 1997–2006 Jeep Wrangler (TJ) and 2004–2006 Jeep Wrangler (LJ) Unlimited
- Installs without drilling
- Sold as a pair, black front entry guards
- Protects the door sill from scuffs and scratches
- UPC 77848071196
SKU: BST51049-01 -
-
Entry Guards
Auto Ventshade Stepshield Entry Guards (Black) – 88106
- Fits the 2004–2006 Jeep Wrangler (LJ) and 1997–2006 Jeep Wrangler (TJ), per the manufacturer fitment list
- Black ABS plastic, 22-1/2 inch long by 2-3/4 inch wide
- Applies with 3M adhesive, no drilling required
- Front position, works with hard or soft doors
- Part number 88106
SKU: AVS88106 -
What entry guards are
Entry guards, sometimes called door sill guards, cover the area where you step when climbing into a vehicle with a high sill. They protect the paint and body from boot scuffs, gravel, and mud and often improve grip underfoot. Most Jeeps with removable doors benefit, since the opening is exposed whenever the doors are off.
Materials and finishes
The sample listings show a few distinct choices.
- Polished stainless steel resists rust and gives a bright finish, but shows fingerprints and light scratches.
- Black powder-coated steel offers a low-gloss look that hides wear, though chips can expose bare metal.
- Anodized aluminum is lighter and resists corrosion.
- Injection-molded ABS plastic with molded tread patterns adds grip and is lightweight.
- Plastic and steel guards also differ in length, width and edge shape.
What to check before buying
Confirm the vehicle and body style, such as TJ Wrangler models or two- and four-door versions, since guard length and shape follow the door opening. Check whether the guards are sold as a pair and how many pieces the set includes.
Attachment methods vary. Some use included mounting hardware that bolts to existing holes, some require no drilling, and others rely on automotive-grade 3M adhesive. Adhesive guards need a clean, dry surface and the correct temperature range to bond properly. If you remove doors often, a firmly attached guard is preferable to one that shifts.
Installation and care
Clean the sill with an appropriate cleaner and test-fit before removing adhesive backing. Press firmly along the whole guard and allow the adhesive to cure as the instructions say before exposing it to water or heavy use. For bolted types, use the supplied hardware and avoid overtightening on thin sheet metal.
Clean polished steel with a non-abrasive metal cleaner, and rinse debris from under guards so moisture does not trap against paint. Check fasteners occasionally on trails. Entry guards are not a substitute for rock sliders, which are designed to bear structural impacts.
If you plan to keep the doors off for long periods, choose a guard that adds a bit of traction underfoot. Raised tread patterns shed mud and help prevent slipping when you climb in with wet boots, which is a practical detail that is easy to overlook.
Fit, wear and maintenance over time
Entry guards take real abuse. Boots grind dirt and sand across the surface, mud packs into the tread, and trail debris scratches the finish. Choose a design with rounded or finished edges so that clothing does not snag, and with enough width to cover the area where your feet land. Compare lengths on each listing against your door opening so that the guard does not stop short of the sill.
- Remove the guard once a year if it is bolted, and clean underneath to prevent trapped moisture and paint damage
- Touch up chips in powder coat to prevent rust from spreading
- Check adhesive edges for lifting after washing or pressure washing
- Keep drain holes in the sill or door opening clear
- Avoid using the guard as a lifting point or a place to strike with tools
If you use a vehicle for work or often carry gear, consider the finish that best hides wear. Polished metal shows scratches quickly, while textured black finishes and molded tread patterns tend to look better over time. On a vehicle that is washed often, make sure the guard design does not trap water against paint, since that can cause corrosion beneath it.
Popular Entry Guards brands
- Rugged Ridge (9)
- Smittybilt (5)
- Rampage (3)
- Kentrol (3)
- Jeep (3)
- RT Off-Road (2)
- Auto Ventshade (2)
- Bestop (1)
- Omix-Ada (1)
- Drake (1)
Entry Guards FAQ
Do entry guards require drilling?
Some kits bolt to existing holes or use adhesive, and some listings state that no drilling is required. Check each product's installation details for your vehicle.
Are entry guards the same as rock sliders?
No. Entry guards protect the sill from foot traffic and light scuffs, while rock sliders are heavy structural bars that protect the rocker panels from trail impacts.
Which material lasts longest?
Stainless steel and aluminum resist corrosion well, while ABS resists dents and adds traction. Finish, thickness and use all matter, so compare descriptions and your needs.
Will entry guards fit my Wrangler?
Fitment depends on model and body style. Listings call out vehicles such as the TJ, with two- or four-door differences, so confirm year and model on the product page.











