Toyota Land Cruiser Suspension
90 suspension listed for the 1960–2021 Toyota Land Cruiser
Every part on this page is listed by its maker for this model; the most represented brands are ARB 4x4 Accessories, Skyjacker and Rancho. Open a part for its specs, part number and the exact model years and trims it covers, or select your year below to check fitment on every page.
Narrow it down: Shock Absorbers 68
Showing 1–24 of 90 resultsSorted by popularity
-
Leaf Spring Shackle Kit
ARB Shackle And Pin Kit – OMEGS2
- Fits Toyota Land Cruiser (Base) for 1960–2011 and 2013–2014 per the manufacturer fitment list
- Front position shackle and pin kit, part number OMEGS2
- Greasable pins with two grease outlet holes each
- Bolt-together design intended to avoid out-of-angle shackle pin to side plate problems
SKU: ARBOMEGS2 -
Leaf Spring Shackle Kit
ARB Shackle And Pin Kit – OMEGS19
- Fits the Toyota Land Cruiser (Base) for 1984–2011 and 2013–2014 per the manufacturer fitment list
- Rear position shackle and pin kit, part number OMEGS19
- Greasable pins with two grease outlet holes each
- Bolt-together assembly intended to avoid out-of-angle shackle pin to side plate problems
SKU: ARBOMEGS19 -
Leaf Spring Shackle Kit
Warrior Warrior Shackles – 110
- Fits the 1960–1984 Toyota Land Cruiser (Base)
- Lifts one end of the vehicle from 1/2 inch up to 2-1/2 inch, depending on application
- MIG-welded and jig-built, with mounting hardware for installation
- Hammertone gray or gold zinc finish
- Sold in pairs; part number 110
SKU: W/I110 -
Shock Absorbers
Pro Comp ES3000 Series Shock Absorber – 324509
- Rear shock for a long list of Chevrolet, GMC, Dodge, Ford, Jeep, Mazda, Toyota, Isuzu and Mercury trucks and SUVs
- Part 324509, ES3000 Series, rated for a 1 to 4 in. lift
- Extended length 24.84 in, collapsed length 14.82 in, travel 10.02 in
- Loop upper and lower mounts, hydraulic, non-adjustable
SKU: EXP324509 -
Shock Absorbers
Bilstein 5100 Series Shock Absorber – 33-185552
- Bilstein 5100 Series rear shock, part 33-185552, for the 1961-1983 Toyota Land Cruiser Base
- Monotube gas pressure design with self-adjusting deflecting disc valving
- Collapsed length 15.91 in., extended length 25.93 in., travel 10.02 in.
- 16mm eye mounts at both ends, zinc plated, boot included
SKU: BIL33-185552 -
-
Shock Absorbers
Rancho Shock Absorber – RS55119
- Fitment list covers 1956 to 1995 Jeep CJ, Commando and Jeepster models, Dodge D300 and W300, International Scout and Toyota Land Cruiser
- Direct fit, gas charged, lift height w/0 – 3 in. Lift
- Part number RS55119, UPC 10039703006313
- Mounting position to confirm before fitting
SKU: RANRS55119 -
Shock Absorbers
Rancho RS5000X Series Shock Absorber – RS55113
- Fits many Chevrolet, GMC, Jeep, Ford, Toyota and Nissan models from 1943 to 2011 per the manufacturer fitment list
- Rear position, direct fit, gas charged
- Part number RS55113, UPC 10039703006290
- Lift height w/0 in. Lift/Drop
SKU: RANRS55113 -
Shock Absorbers
Fox Racing Shox Fox 2.0 Performance Series Smooth Body IFP Shock – 985-24-087
- Fits the 1989–2007 Toyota Land Cruiser (Base)
- Rear position, direct replacement IFP shock
- Gas charged with an aluminum body
- Extended 27.25 inch, collapsed 16.65 inch, 10.6 inch stroke
- Lift range 3 to 5 in.; part number 985-24-087
SKU: FOX985-24-087 -
-
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8041
- Front position, fits listed 2004–2018 Ford F-150 and a range of older Ford, Chevrolet, GMC, Dodge and Toyota trucks
- 150 PSI nitrogen gas, twin tube construction
- Part number N8041, UPC 803696149677
- Listed lift height w/4.5 – 6 in. Lift
- Sold as each, includes red boot
SKU: SKYN8041 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8023
- Rear Skyjacker Softride Nitro shock, part number N8023
- Rear position; can be used at the front or rear
- Fits a broad range of trucks, SUVs and Jeeps from 1955 to 2005
- Lift height w/1 – 2.5 in. Lift
- For suspension lifts only; will not lift the vehicle
SKU: SKYN8023 -
Shock Absorbers
Skyjacker Softride Hydro Shock Absorber – H7012
- Rear Softride Hydro shock absorber, part number H7012, for 0 to 2.5 in. lifts
- Fitment list runs from 1955 to 2009 and covers many older trucks, SUVs and Jeeps
- Collapsed length 12.07 in., extended length 19.07 in., 7 in. stroke
- Includes red polyurethane bushings and a red boot
SKU: SKYH7012 -
Shock Absorbers
Skyjacker M95 Performance Monotube Shock Absorber – M9560
- Rear gas monotube shock, part number M9560, from the M95 Performance series
- Made for Chevrolet and GMC pickups, Ford Bronco and F-series, Mazda and Toyota trucks
- Years range from 1967 to 2018 across the list
- Listed lift value reads 10 – 9.5 in.; confirm before ordering
SKU: SKYM9560 -
-
Shock Absorbers
Skyjacker BlackMAX Shock Absorber – B8541
- Front Black MAX shock absorber, direct fit for a long list of Ford, Dodge, Chevrolet, GMC and Toyota trucks
- Part number B8541; extended length 26.07 in., collapsed length 15.57 in.
- Black boot included
- Fitment spans 1965 to 2012 model years in the manufacturer list
SKU: SKYB8541 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8060
- Rear Skyjacker Softride Nitro shock, part number N8060, with 150 PSI nitrogen gas
- Fits Ford, Chevrolet, GMC, Mazda and Toyota trucks and SUVs from 1965 to 2018, by model and year
- Bonded iron piston and chromed piston rod
- Red polyurethane bushings and red boot
- Carries a limited lifetime warranty
SKU: SKYN8060 -
Shock Absorbers
Skyjacker Softride Hydro Shock Absorber – H7060
- Skyjacker Softride Hydro rear shock, part number H7060
- Listed fitment covers Chevrolet, Ford, GMC, Mazda and Toyota trucks and SUVs
- Hydraulic twin tube with 5/8 inch hardened double chrome rod
- Confirm the lift range your suspension needs before ordering
SKU: SKYH7060
