Overview
The ARB CS017RB is a heavy-load leaf spring from ARB 4×4 Accessories, part number CS017RB. It is a direct fit for the 1980–1999 Toyota Land Cruiser Base, a wider year range than its CS017RA sibling. The two-stage pack handles the unladen ride on the primary leaves and adds support on the secondary stage.
Draw tapered, diamond cut leaves spread the load across the spring. The leaves are graphite coated, shot peened on the tension side, and fitted with nylon interleaf liners at the tips. Each spring is fully scragged and load tested against its specification.
The heavy-load rating and the longer 1980–1999 range make this spring the one to consider for a Land Cruiser that carries more weight across more years of the model. The CS017RA and CS017RB share the same leaf construction, so the difference between them comes down to the load rating and the years listed.
The CS017RB’s rating and its 1980–1999 coverage suit a Land Cruiser that is used for heavier work over a longer period of the model’s life. The graphite coating, shot peening and nylon pads are the same features as the medium-duty CS017RA, so the load rating is the main reason to pick one over the other.
Key features
- Heavy-load rating for added capacity.
- Two-stage leaf pack for comfort and support.
- Draw tapered leaves spread load over a larger surface.
- Diamond cut leaf ends reduce stress at the tips.
- Fully scragged and load tested.
- Graphite coating between the leaves.
- Regreasable nylon pads at the leaf tips.
- Shot peened tension side of each leaf.
Heavy loads on an older truck
A heavy-load spring is intended for a Land Cruiser that carries more weight on a regular basis, such as full loads of gear, water or tools. The two-stage pack keeps the unladen ride controlled, and the secondary stage takes over as weight is added. Because the rated load is only useful if it matches real use, track the typical weight of each trip before fitting one. Older trucks also deserve a closer look at the whole rear end before a new spring goes in.
Older trucks show wear in the same places a new one does, only more of it. The leaf tips, interleaf pads, shackles and bushings all carry more stress under heavy loads. Keep the nylon pads greased on schedule, clean mud and grit from the pack after trail runs, and look for fretting or cracks at the eye and tips when the spring is out.
- Weigh typical loads before choosing
- Grease nylon pads regularly
- Replace worn shackles and bushings together
- Check for uneven sag between sides
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | CS017RB |
| UPC | 700003404961 |
| Load rating | Heavy load |
| Leaf pack | Two-stage |
| Leaf ends | Draw tapered, diamond cut |
Vehicle fitment
It is a direct fit for the 1980–1999 Toyota Land Cruiser (Base). Confirm your vehicle’s year, model and trim before ordering.
Land Cruiser years after 1999 and other Toyota models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One leaf spring. Check the package contents against your installation before starting.




