Ford Bronco Bumpers and Grille Guards
34 bumpers and grille guards listed for the 1966–2026 Ford Bronco
Every part on this page is listed by its maker for this model; the most represented brands are Fab Fours, Addictive Desert Designs and DV8 Offroad. Open a part for its specs, part number and the exact model years and trims it covers, or select your year below to check fitment on every page.
Narrow it down: Front Bumpers 26
Showing 1–24 of 34 resultsSorted by popularity
-
-
-
-
-
Bumpers
Fab Fours Stubby Front Winch Bumper with Pre-Runner Guard (Black) – FB21-B5252-1
- Fits 2021–2026 Ford Bronco, two-door and four-door
- Stubby front winch bumper with pre-runner guard
- Holds up to six LED pods, or two pods and four 5.5-inch round lights
- Matte black 3/16 inch US steel
SKU: FFIFB21-B5252-1 -
Bumpers
Fab Fours Stubby Front Winch Bumper with No Guard (Black) – FB21-B5251-1
- Fits 2021–2026 Ford Bronco, two-door and four-door
- Stubby front design built to hold a WARN Zeon 12 or lower winch
- Holds up to six LED pods, or two pods and four 5.5-inch round lights
- 3/16 inch US steel, made in the USA; no guard version
SKU: FFIFB21-B5251-1 -
Bumpers
Fab Fours Matrix Series Front Bumper with Pre-Runner Guard (Black) – FB21-X5252-1
- Fab Fours Matrix Series pre-runner guard front bumper, matte black steel, part number FFIFB21-X5252-1
- Fits 2021–2026 Ford Bronco trucks
- Hoop and D-ring mounts included, winch mount compatible
- Ready for a 20-inch single-row light bar and four 3×3 LED cubes
SKU: FFIFB21-X5252-1 -
Bumpers
Fab Fours Matrix Series Front Bumper with No Guard (Black) – FB21-X5251-1
- Fab Fours Matrix Series front bumper with no guard, matte black steel, part number FFIFB21-X5251-1
- It fits 2021–2026 Ford Bronco trucks
- Winch mount compatible, ready for a 20-inch single-row light bar and four 3×3 LED cubes
- Hoop not included; full width, direct fit
SKU: FFIFB21-X5251-1 -
Bumpers
Fab Fours Matrix Series Front Bumper with Full Guard (Black) – FB21-X5250-1
- Fab Fours Matrix Series full guard front bumper, matte black steel, part number FFIFB21-X5250-1
- Fits 2021–2026 Ford Bronco trucks
- Ready for a 20-inch single-row light bar and four 3×3 LED cube lights
- Fits a WARN VR EVO 10 or smaller winch
SKU: FFIFB21-X5250-1 -
-
Bumpers
DV8 Offroad MTO (Made to Overland) Series Front Bumper – FBBR-01
- Full-width, winch-ready front bumper
- Winch mount inside the bumper, up to 12,000 lb
- 3-inch pod light mount on each side
- Paintable mesh inserts
- Light brackets for a single row 20-inch light bar
- Optional bull bar for a 13-inch LED light bar
SKU: DV8FBBR-01 -
Bumpers
DV8 Offroad FS-15 Series Winch-Ready Mid-Width Front Bumper – FBBR-02
- Mid width with optional modular wings for full width
- Winch mount compatible, up to 12,000 lb
- Center mount for a 20-inch dual row light bar or six pod lights
- Light mounts that take a 13-inch light bar above or below the bull bar
- Two recovery mounts for 3/4 inch D-rings
- Retains the factory parking sensors
SKU: DV8FBBR-02 -
-
Bumpers
ARB Summit Winch Front Bumper – 3480010
- Full-width bumper that replaces the factory front bumper
- Compatible with winches up to 10,000 lb
- Twin jack points and rated recovery points
- Accommodates adaptive cruise control and parking sensors
- Light mounts and D-ring mount included
- Includes hoop
SKU: ARB3480010 -
Bumpers
Addictive Desert Designs Rock Fighter Rear Bumper with Sensor Cutouts – R23012NA01NA
- Fits the 2021–2026 Ford Bronco
- Relocation bracket allows a 37-inch spare tire to mount
- Keeps the OEM tire mount, backup camera, hitch and license plate light
- Two reinforced clevis mounts for 3/4-inch D-rings
- Sensor cutouts for factory backup sensors
SKU: ADSR23012NA01NA -
Bumpers
Addictive Desert Designs Rock Fighter Front Skid Plate – AC23005NA03
- Fits the 2021–2026 Ford Bronco
- Replaces the stock plastic front skid plate
- Steel construction with powder coat finish
- Covers the whole front underbelly of the vehicle
- D-ring and light mounts are not included
SKU: ADSAC23005NA03 -
Bumpers
Addictive Desert Designs Rock Fighter Front Bumper with Light Mounts and Sensor Cutouts – F230181060103
BumpersAddictive Desert Designs Rock Fighter Front Bumper with Light Mounts and Sensor Cutouts – F230181060103
- Designed for the 2021–2026 Ford Bronco
- Low profile top hoop and standard winch mount
- Center light mount for a 20-inch radius bar or 5 cube lights
- Two round light mounts on top, on either side of the hoop
- Vented skid plate with louvers for intercooler airflow
SKU: ADSF230181060103 -
Bumpers
Addictive Desert Designs Bronco Stealth Fighter Rear Bumper – R230081370103
- Rear bumper for the 2021–2026 Ford Bronco per the manufacturer fitment list
- Low-profile plate steel design with two rear-facing cube light mounts
- Integrated license plate mount that retains the license plate light
- Clearance for up to a 37-inch spare tire
- Two reinforced clevis mounts for 3/4-inch D-rings
SKU: ADSR230081370103 -
Bumpers
Addictive Desert Designs Bronco Stealth Fighter Front Bumper – F230142210103
- Front bumper for the 2021–2026 Ford Bronco per the manufacturer fitment list
- Inset mounts for a 30-inch radius light bar or 8 cube lights in the center
- Two more inset cube light mounts toward the ends
- Louvered bottom panel for intercooler airflow
- Optional 3/16-inch aluminum skid plate; plugs supplied for models without parking sensors
SKU: ADSF230142210103 -
Bumpers
Addictive Desert Designs Bomber Front Bumper with Rigid Light Mounts – F230194130103
- Front bumper for the 2021–2026 Ford Bronco per the manufacturer fitment list
- Center panel with three mounting points for Rigid 360 6-inch lights
- Cube light mounts on both sides, framed by satin black aluminum
- Two reinforced clevis mounts for 3/4-inch D-rings
- Optional 3/16-inch vented aluminum skid plate
SKU: ADSF230194130103 -
Bumpers
Addictive Desert Designs Bomber Front Bumper with Baja Designs Light Mounts – F230194120103
- Front bumper for the 2021–2026 Ford Bronco per the manufacturer fitment list
- Center panel with three mounting points for Baja Designs LP4 lights
- Cube light mounts framed by satin black aluminum panels
- Two reinforced clevis mounts for 3/4-inch D-ring shackles
- Optional 3/16-inch vented aluminum skid plate
SKU: ADSF230194120103






















